Datasheet
Features
■ SMD Single-Turn / Cermet / Industrial
Open Frame
■ Cross slot rotor designs suitable
for automatic adjustment equipment
■ Supplied in 12 mm embossed tape,
compatible with automatic pick-and-place
assembly equipment
■ Recommended for refl ow solder
processing only
■ RoHS compliant* - see processing
information on lead free surface mount
trimmers
■ For trimmer applications/processing
guidelines, click here
3364 - 4 mm Square Trimpot
®
Trimming Potentiometer
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
Electrical Characteristics
Standard Resistance Range
......................100 ohms to 1 megohm
(see standard resistance table)
Resistance Tolerance ........... ±25 % std.
End Resistance
<1K ............................... 20 ohms max.
>1K ............................................... 2 %
Contact Resistance Variation
(Voltage Divider) .................. 5 % max.
Resolution ................................... Infi nite
Adjustment Angle ..................260 °±20 °
Environmental Characteristics
Power Rating (50 volts max.)
70 °C ......................................0.2 watt
Temperature Range ... -40 °C to +100 °C
Temperature Coeffi cient ... ±250 ppm/°C
Humidity ................500 hours (5 % ΔTR)
Load Life .................................500 hours
0.2 watt @ 70 °C (5 % ΔTR)
Rotational Life ..... 20 cycles (15% ΔTR)
Physical Characteristics
Torque ............................ 20 to 200 g-cm
Mechanical Angle ................ Continuous
Marking ....................... Resistance code,
manufacturer’s full part number
and date code on packaging
Terminals ......................... Solder coated
Standard Packaging ... 1000 pcs./7 ˝ reel
Adjustment Tool ..............................H-90
Aqueous cleaning not recommended.
Refl ow solder processing recommended
Product Dimensions
1
3
CW
CLOCKWISE
CCW
2
WIPER
How To Order
3364 X - 1 - 103 E
Model
Style
Orientation of parts in tape:
Styles W,A
Terminals toward sprocket holes
Styles X,B
Terminals away from sprocket
holes
Standard Product
Resistance Code
Embossed Tape Designator
E = 1000 pcs./7 ” reel (-1 standard)
Consult factory for other available options.
TOLERANCES: ±
0.25
EXCEPT WHERE NOTED
(.010)
DIMENSIONS:
MM
(INCHES)
*RoHS COMPLIANT
3364A, B
3-Terminal
1.50
(.059)
2.40
(.094)
0.80
(.031)
5.08
(.200)
1.10
(.043)
SUGGESTED PWB LAYOUT
3.80
(.150)
2.50 ± 0.15
(.098 ± .006)
0.55 ± 0.15
(.022 ± .006)
2.00
(.079)
4.20
(.165)
2.20
(.087)
1
32
0.99
(.039)
0.80
(.031)
2.00
(.079)
1.20
(.047)
1.35
(.053)
0.50
(.020)
2
0.80
(.031)
0.80
(.031)
1.90
(.075)
1.40
(.055)
3
1
0.60
(.024)
1.20
(.047)
1.20
(.047)
1.20
(.047)
0.60
(.024)
MAX.
1.50
(.059)
Common Dimensions
3364W, X
3-Terminal
2
1
3
1.00
(.039)
3
1
2
SUGGESTED PWB LAYOUT
2.30
(.091)
2.40
(.094)
5.10
(.201)
3.80
(.150)
2.50 ± 0.15
(.098 ± .006)
2.00
(.079)
4.50
(.177)
2.20
(.087)
0.12
(.047)
0.80
(.031)
1.40
(.055)
1.10
(.043)
0.55 ± 0.15
(.022 ± .006)
MAX.
ADJ. CROSS SLOT
0.55
± .15
(.022
± .006)
0.35
(.014)
2.50
(.098)
WIDE
X
X
DEEP
LONG
1.50
(.059)
1.50
(.059)
1.60
(.063)
0.95
(.037)
0.95
(.037)
1.60
(.063)
1.30
(.051)
1.50
(.059)
1.30
(.051)