Datasheet

ManualsBrandsBOURNS ManualsResistorsCermet resistor 100 Ω SMD 0402 0.063 W 1 % 100 ±ppm/°C 1 pc(s)

Features

■ Small package dimensions

■ RoHS compliant*

■ Power rating at 70 °C = 1/16 W

■ Tight dimensional tolerances

■ Three layer termination process with

nickel barrier prevents leaching and

provides excellent solderability

■ Suitable for most types of soldering

processes

■ Standard packaging on paper tape and reel

CR0402 - Chip Resistor

*RoHS Directive 2002/95/EC Jan 27 2003 including Annex.

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

Electrical Characteristics

Power Rating @ 70 °C ................ 1/16 W

Operating Temperature Range

............................... -55 °C to +125 °C

Derated to 0 Load at .................+125 °C

Maximum Working Voltage ..............50 V

Maximum Overload Voltage ..........100 V

Resistance Range

1 %, E-96 and E-24

........................10 ohms to 1 megohm

5 %, E-24

..................2.2 ohms to 5.6 megohms

Zero Ohm Jumper ............<0.05 ohms

Temperature Coefﬁ cient

1 % ................................ ±100 ppm/°C

5 % ................................ ±200 ppm/°C

2.2 ohm to 10 ohms

............ -200 ppm/°C to +500 ppm/°C

For Standard Values Used in Capacitors,

Inductors, and Resistors, click here.

Derating Curve

Dimensional Drawings

DIMENSIONS:

(INCHES)

100

Rated power in percentage (%)

-55

125

0.20 ± 0.10

(0.008 ± 0.004)

0.20 ± 0.10

(0.008 ± 0.004)

0.50 ± 0.05

(0.020 ± 0.002)

0.25 ± 0.10

(0.010 ± 0.004)

0.25 ± 0.10

(0.010 ± 0.004)

0.35 ± 0.05

(0.014 ± 0.002)

1.00 ± 0.10

(0.040 ± 0.004)

Overcoat

Resistor (Ru02)

(Jumper chip is

a conductor)

Alumina Substrate

Internal Electrode (Ag-Pd)

Secondary Electrode (Nickel Plated)

External Electrode

(see Part Numbering - may be

ordered as solder-plated

or tin-plated

)

Characteristic Data

3.0

2.0

1.0

10 100 1K 10K 100K 1M

Load Life 1000Hr

∆ R/R

(%)

Resistance Value (Ω)

3.0

2.0

1.0

10 100 1K 10K 100K 1M

Moisture Load Life 1000Hr

∆ R/R

(%)

Resistance Value (Ω)

1.0

0.5

-0.5

10 100 1K 10K 100K 1M

Short Time Overload

∆ R/R

(%)

Resistance Value (Ω)

*RoHS COMPLIANT

Summary of content (3 pages)

PAGE 1
PL IA NT Features CO M ■ Small package dimensions ■ Suitable for most types of soldering processes *R oH S ■ RoHS compliant* ■ Standard packaging on paper tape and reel ■ Power rating at 70 °C = 1/16 W ■ Tight dimensional tolerances ■ Three layer termination process with nickel barrier prevents leaching and provides excellent solderability CR0402 - Chip Resistor Derating Curve Rated power in percentage (%) Electrical Characteristics Power Rating @ 70 °C ................
PAGE 2
CR0402 - Chip Resistor Soldering Profile for RoHS Compliant Chip Resistors and Arrays 275 <1> Maximum of 20 seconds between 260 °C peak +255 °C and +260 °C <1> 255 °C 225 Temperature (°C) 220 °C 190 °C 175 60 - 90 seconds Ramp Down 6 °C/second 150 °C 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 °C/second maximum 25 0 50 100 150 Time (seconds) 200 250 300 Packaging Dimensions (Conforms to EIA RS-481A) 1.0 ± 0.2 (.040 ± .020) 1.5 + 0.1/-0 DIA. (0.059 + 0.004/-0) 0.45 ± 0.1 (0.
PAGE 3
CR0402 - Chip Resistor How to Order CR 0402 - F X - 8252 G LF Model (CR = Chip Resistor) Size • 0402 Resistance Tolerance F = ±1 % .............Used with “X” TCR code only for values from 10 ohms through 1 megohm. J = ±5 % ............... Used with “W” TCR code for values from 10 ohms through 5.6 megohms. Used with “/” TCR code for zero ohm (jumper) and for values from 1 ohm through 9.1 ohms. TCR (ppm/°C) X = ±100 ..............