Datasheet

USB
USB 2.0 - ESD & Overcurrent Protection
MF-NSMF075-2
CG0603MLC-05LE
USB Port
GND
V
bus
D+
D-
USB
Controller
e schematic above illustrates the application protection and does not constitute the complete
circuit design. Customers should verify actual device performance in their specic applications.
MF-NSMF075-2
CG0603MLC-05LE
COPYRIGHT© 2012 • BOURNS, INC. • 6/12 • e/CPK1138 • “PortNote” is a registered service mark of Bourns, Inc.
“Bourns”, “Multifuse” and “ChipGuard” are registered trademarks of Bourns, Inc. in the U.S. and other countries.
Solution Products
Asia-Pacific: Tel [phone]
Fax [phone]
Bourns® PortNote® solutions provide protection
recommendations for typical port threats.
For more information, go to:
www.bourns.com
or email: [e-mail]
Americas: Tel [phone]
Fax [phone]
Europe: Tel [phone]
Fax [phone]
Compliance
USB 2.0
UL60950
IEC 61000-4-2 Level 4 (8 kV / 15 kV)
Alternate Recommendations
Other PortNote® Solutions:
• USB: USB 3.0 - ESD & Overcurrent Protection
Benefit
is solution provides USB 2.0 ports with
compatible protection without impairing the
transmission of power or data.
Objective
Universal Serial Bus (USB) 2.0 ports provide
up to 480 Mbps data transfer rates and 5 V
power at up to 500 mA. As a hot-pluggable
interface, it typically requires protection
against ESD and short circuits. is solution
provides this protection.
Solution
1 Multifuse® PPTC: MF-NSMF075-2
3 ChipGuard® ESD Suppressors:
CG0603MLC-05LE
PN-DESIGNKIT-3
Design Kit