TreadClimber Assembly Manual

Assembly Manual

Figure 12-1

Figure 12-2

Step 12: Adjust Speed Sensor and Attach

the Rear Cover

Parts:

• TreadClimber

Base and Treadle assembly from Step 11

• (1) Rear Cover

Hardware:

• (4) #10 Phillips Head Screws

Tools:

• #2 Phillips Head Screwdriver (included)

12-1 Hold a stiff business card, ID card, or similar object onto

the inside of the drive pulley. Adjust the speed sensor

towards the card until it just makes contact.

12-2 Remove object.

12-3 Attach the rear cover to the back of the frame with the (4)

#10 Phillips Head Screws (2 per side) and the provided #2

Phillips Head Screwdriver (See Figure 12-1 and 12-2).

Assembly