Specifications

PARTS LIST AND PARTS LIST DRAWING
8
REPLACEMENT PARTS LIST FOR INDUCED DRAFT MODELS
Contact your supplier, plumbing professional or the company listed on the rating plate of the water heater for replacement parts.
Provide the part name as well as the model and serial number(s) of the water heater(s) when ordering parts. When applicable, the
following information shall be provided: type of gas, voltage and amperage, item number (from the following list) and description (from
the following list)
PART NAME AND DESCRIPTION
1. Induced Draft Blower/Motor Assembly 19. Control Box
2. Blower Mounting Flange 20. Control Box Cover
3. Blower Mounting Flange Gasket 21. Transformer
4. Collector to Blower Transition Duct 22. Temperature display (Emergency shut-off)
5. Blower-Vent Pipe Adapter 23. On/Off Switch
6. Air Pressure Switch 24. Integrated Control
7. Pressure Switch Tubing 25. Sensor Well
8. Flue Baffle 26. Wire Harness - Thermostat to Blower
9. Clean-out Hole Tank Cover 27. Wire Harness - Control Box
9a. Clean-out Hole Cover O-Ring (not shown) 28. Outer Cleanout Cover
9b. Clean-out Hole Cover Gasket (not shown) 29. Flue Collector Cover
10. Radiation Shield 30. Flue Collector Cover Gasket
11. Main Burner(s) 31. Anode Rod (Not Shown)
12. Burner Tray 32. Tank Leg Thermal Break
13. Pilot Burner Assembly 33. Manual shut-off (optional)
14. Pilot Supply Tube 34. T&P Relief Valve
15. Pilot Draft Shield 35. Drain Valve
16. Main Burner Manifold 36. Lower Sensor
17. Gas Valve (Emergency Shut-off Device) 37. Upper Sensor
18. Main Burner Orifice(s)