Spec Sheet
3 or 5-Year Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419;
7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379;
7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515;
2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
735-F-1121
Commercial Flue Damper Electronic Ignition
Gas Water Heater (D-Series)
The Commercial Flue Damper Models feature:
n ICON HD
®
—Intelligent proven design combines temperature control, diagnostic codes,
and system ignition functions into a single control board with a digital LCD display.
Control panel cover tilts down for ease of wiring and service.
n Operation Mode—Two different digitally displayed operation modes have the capability
of adjusting the temperature setting up to 180°F (82°C), and adjusting the degree setting
(ºF to ºC, or ºC to ºF).
n Service Mode—Eight different digitally displayed service modes can be easily cycled
through by pressing the select button.
• Adjust the temperature setting up to 180°F (82°C)
• Change the degree setting (ºF to ºC, or ºC to ºF)
• Lock the maximum temperature setting that can be adjusted in operation mode
• Display the average water temperature (for two sensor models) and see the upper and
lower temperature sensor readings
• Read the flame current of the pilot flame
• Show diagnostic codes - 16 different numeric error codes; access an error code
history of the last 10 codes
n Electronic Ignition—High voltage, low current electricity is sent to the pilot electrode
initiating a spark to ignite the pilot gas. Saves pilot gas during standby periods; the pilot
flame only operates when there’s a call for heat.
n Automatic Flue Damper—Reduces stand-by loss, saving gas consumption and
improving overall efficiency.
n Factory Installed Hydrojet
®
Sediment Reduction System—Cold water inlet
sediment reducing device helps prevent sediment build up in the tank.
n Vitraglas
®
Lining—An exclusively engineered enamel formula that provides superior
tank protection from the highly corrosive effects of hot water. This formula (Vitraglas
®
) is
fused to the steel surface by firing at a temperature of over 1600°F (871°C).
n Insulation System—Non-CFC foam covers the sides and top of the tank, reducing
heat loss. This results in less energy consumption, improved efficiencies, and jacket
rigidity.
n Water Connections—1
1
⁄
2
" (38mm) NPT factory-installed true dielectric fittings extend
water heater life and simplify water line connections.
n Hand Hole Cleanout—Allows inspection of tank interior and facilitates the removal of
sediment deposits.
n E.C.O.—An automatic reset Energy Cut Out (E.C.O.) shuts off all gas in event of an
overheat condition. This automatically resets when operation conditions are back to
normal.
n Protective Magnesium Anode Rods—Provide added protection against corrosion for
long-term, trouble-free service.
n Sanitizing Capability—Temperature setting up to 180°F (82°C).
n ASME Code Available on all Models Above 200,000 BTU/Hr.
n NSF and Low NOx Construction Available.
n T&P Relief Valve—Installed.
n Low Restrictive Brass Drain Valve—Durable tamper proof design.
n Design certified by CSA International.
Photo is of
D-75T-125-3N
FEATURING: