Installation / Operation Instruction Manual

SECTION XIII: INSTALLATION FOR POTABLE WATER AND SPACE HEATING

THE FOLLOWING INSTRUCTIONS ARE FOR INSTALLATION OF:

GAS WATER HEATERS SUITABLE FOR WATER (POTABLE) HEATING AND SPACE HEATING

1. All piping components connected to this water heater for space heating applications must be suitable for use with

potable water. In Massachusetts, space heating piping length must not exceed 50 feet.

2. Toxic chemicals, such as those used for boiler treatment, must not be introduced into potable water used for

space heating.

3. This water heater must not be connected to an existing heating system or component(s) previously used with a

non-potable water heating appliance.

4. When the system requires water for space heating at temperatures higher than required for other uses, a means

such as an ASSE approved mixing valve shall be installed to temper the water for those uses in order to reduce

scald hazard potential.

Please refer to the illustrations below and on the following pages for suggested piping arrangements.