Spec Sheet

ManualsBrandsBradford White ManualsResidentialWall Hung Electric

Residential Wall Hung

Energy Saver Electric Water Heater

The Wall Hung Electric Models Feature:

■ DOE—All residential storage models above 20 gallon capacity meet or

exceed efficiency requirements of the Department of Energy. ASHRAE

Standard 90.1 b (current standard) and the National Appliance Energy

Conservation Act of 1987 recent amendment effective January 20, 2004

which supercedes all state and local efficiency requirements.

■ Fully Automatic Controls—Fast acting surface-mount thermostat for

automatic temperature control. Factory installed sensitive manual reset

energy cut-off for safety to prevent overheating.

■ Direct Heat Transfer With a Single Immersed Element—Transfers heat

directly and efficiently to the water. Screw-in style element.

■ Vitraglas

Lining—Bradford White tanks are lined with an exclusively

engineered enamel formula that provides superior tank protection from the

highly corrosive effects of hot water. This formula (Vitraglas

) is fused to the

steel surface by firing at a temperature of over 1600°F (871°C).

■ 1" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing

the amount of heat loss. This results in less energy consumption, improved

operation efficiencies and jacket rigidity (30 gallon model has 2").

■ Factory Installed Heavy Duty Wall Mounting Bracket—no additional

brackets or modifications required.

■ Water Connections—3/4" NPT factory installed true dielectric fittings

extend water heater life and eases installation. Located on the bottom for

easier installation.

■ Protective Magnesium Anode Rod—Provides added protection against

corrosion for long trouble-free service.

■ Steel Tank—Heavy gauge steel automatically formed, rolled, and welded.

■ Voltages Available—120V, 208V, 240V, 277V, 480V.

■ Single Phase Operation Only.

■ T&P Relief Valve—Included.

Photo is of

M-1-WH6U6SS

Copper Screw Type Immersion Element

(Incoloy type immersion element available upon request)

6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.

For more information on warranty, please visit www.bradfordwhite.com

For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete

copy of the warranty included with the heater.

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;

(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;

7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.

Solar Saver

, Vitraglas

and Hydrojet

are registered trademarks of Bradford White

Corporation.

216-B-0213-A

Summary of content (2 pages)

PAGE 1
Residential Wall Hung Energy Saver Electric Water Heater The Wall Hung Electric Models Feature: ■ DOE—All residential storage models above 20 gallon capacity meet or exceed efficiency requirements of the Department of Energy. ASHRAE Standard 90.1 b (current standard) and the National Appliance Energy Conservation Act of 1987 recent amendment effective January 20, 2004 which supercedes all state and local efficiency requirements.
PAGE 2
Residential Electric Water Heater Wall Hung Energy Saver Models Model Number M-1-WH6U6SS† M-1-WH12U6SS M-1-WH20L6SS M-2-WH30L6SS Model Number M-1-WH6U6SS† M-1-WH12U6SS M-1-WH20L6SS M-2-WH30L6SS Capacity Recovery 90°F Rise Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed A Height B Jacket Dia. C Wall to Front D Height to Bracket E Height to T&P Conn. Approx. Shipping Weight U.S. Gal. Imp. Gal. U.S.* GPH Imp.* GPH in. in. in. in. in. lbs.