Spec Sheet

ManualsBrandsBradford White ManualsResidentialAtmospheric Vent Gas

Residential Energy Saver

Gas–Upright

Features:

Bradford White is ISO registered to the

9001-1994 standard.

■ 1" Non-CFC foam insulation—surrounds the tank surface,

saving energy by retarding loss of heat. (except M-

I-75 1

⁄4" and

M-

I-100T 2").

■ Flue baffle—designed to maximize the amount of heat absorbed

in the lower portion of tank. Minimizes air movement in the heater

during standby periods to retard heat loss up the flue.

■ Fully automatic controls—automatic temperature selection at

your fingertips. Built-in energy cut-off switch prevents abnormally

high water temperature for extra safety. Built-in gas pressure

regulation.

■ Vitraglas

lining—Bradford White water heater tanks are

protected from the corrosive effects of hot water by an exclusive

ceramic porcelain-like coating. The Bradford White high silica

Vitraglas

lining provides a tough interior surface for hot water

tanks.

■ Protective magnesium rod—provides added protection against

corrosion for long trouble-free service.

■ Factory installed Hydrojet

Total Performance System—cold

inlet sediment reducing device. Helps prevent sediment build up in

tank. Increases first hour delivery of hot water while minimizing

temperature build up at top of tank. (100 gallon models come

equipped with the Hydrojet Sediment Reduction System.)

■ Factory installed dielectric waterway fittings—all heaters

equipped with special water heater nipples for longer heater life.

■ Brass drain valve.

■ “Snap-Lock” draft diverter.

■ T&P relief valve included.

■ Exclusive “Slider” combustion chamber door [except 75 and

100 gallon (284 and 379 liter) models].

■ Side tappings (for space heating)—standard on 75 (284 liter) and

100 gallon (379 liter) models only.

■ Hand hole cleanout—standard on 100 gallon (379 liter) models

only.

■ Six or ten year limited warranty on steel tank—heavy gauge

steel automatically formed, rolled and welded to assure a

continuous seam for glass lining.

■ Six year limited warranty on parts.

■ Design certified by CSA International (formerly AGA/CGA)

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS:

5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385;

5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952;

5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356;

5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919;

Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING.

CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862;

2,112,515; 2,108,186; 2,107,012.

TANDARD

9001

1994

EFFICIENCY

ATING

CERTIFIED

Summary of content (2 pages)

PAGE 1
EFFICIENCY RATING CERTIFIED Residential Energy Saver Gas–Upright Features: 1 9 9 4 Bradford White is ISO registered to the 9001-1994 standard. 1" Non-CFC foam insulation—surrounds the tank surface, saving energy by retarding loss of heat. (except M-I-75 11⁄4" and M-I-100T 2"). Flue baffle—designed to maximize the amount of heat absorbed in the lower portion of tank. Minimizes air movement in the heater during standby periods to retard heat loss up the flue.
PAGE 2
Residential Energy Saver Gas-Upright 8" These water heaters meet or exceed the performance standards established under ASHRAE Standard 90.1b current standard. B C F D• H A Natural Gas Burner Assembly – satisfies any and all local codes and emission standards for US. G E LP Gas heaters equipped with high performance cast iron burner. The best LP burner available. NEW LOW CONSUMPTION PILOT USES LESS B.T.U.’S •Optional T&P Location Dimension Foam Insulation (except where noted) C.E.C.