Spec Sheet

ManualsBrandsBradford White ManualsResidentialManufactured Home Atmospheric Vent Gas - Canada

Features:

Bradford White is ISO registered to the

9001-standard.

■ All residential storage models meet or exceed efficiency requirements

of the Department of Energy. ASHRAE Standard 90.1 b (current

standard) and the National Appliance Energy Conservation Act of 1987

recent amendment effective January 20, 2004 which supercedes all

state and local efficiency requirements.

■ 1" Non-CFC foam insulation—covers the side and top of tank, saving

energy by retarding loss of heat.

■ Flue baffle—designed to maximize the amount of heat absorbed in the

lower portion of tank. Minimizes air movement in the heater during

standby periods to retard heat loss up the flue.

■ Fully automatic controls—automatic temperature selection at your

fingertips. Built-in energy cut-off switch prevents abnormally high water

temperature for extra safety. Built-in gas pressure regulation.

Convertible control for use with LP or Natural Gas.

■ Vitraglas

lining—Bradford White water heater tanks are protected

from the corrosive effects of hot water by an exclusive ceramic

porcelain-like coating. The Bradford White high silica Vitraglas

lining

provides a tough interior surface for our hot water tanks.

■ Protective magnesium anode rod—provides added protection

against corrosion for long trouble-free service.

■ Roof jack package for installation flexibility—(Shipped with heater in

separate box.) Must specify size when ordering. Available in 12",

18"/32", 32"/60" or 48"/95" (305mm, 457mm/813mm,

813mm/1524mm, 1219mm/2413mm) lengths.

■ Factory installed dielectric waterway fittings—for longer water

heater life. Easier installation.

■ T&P relief valve opening—all sizes have special tapping on side of

tank for ease of installing relief valves.

■ Brass drain valve.

■ Exclusive “Slider” combustion chamber door.

■ Six or ten year limited warranty on steel tank—heavy gauge steel

automatically formed, rolled and welded to assure a continuous seam

for glass lining.

■ Six year limited warranty on parts.

■ Design certified by CSA International (formerly AGA/CGA)

Optional Equipment:

■ Leg enclosure kit—optional air supply modification—atmospheric

models only. Includes adjustable air intake tube.

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492;

5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185;

5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031;

5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222;

4,628,184; 4,861,968; 4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT

APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832;

2,045,862; 2,112,515; 2,108,186; 2,107,012.

Residential Energy Saver

Gas–Upright

For Manufactured Homes

Atmospheric Combustion

STANDARD

9001

EFFICIENCY

RATING

CERTIFIED

Summary of content (2 pages)

PAGE 1
EFFICIENCY RATING CERTIFIED Residential Energy Saver Gas–Upright For Manufactured Homes Atmospheric Combustion Features: 9001 S T A N D A R D Bradford White is ISO registered to the 9001-standard. ■ All residential storage models meet or exceed efficiency requirements of the Department of Energy. ASHRAE Standard 90.1 b (current standard) and the National Appliance Energy Conservation Act of 1987 recent amendment effective January 20, 2004 which supercedes all state and local efficiency requirements.
PAGE 2
Residential Energy Saver Gas-Upright FOR MANUFACTURED HOMES ATMOSPHERIC COMBUSTION Design evaluated in accordance with the H.U.D. Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280.707 (d)(2) for energy efficiency. These water heaters meet or exceed the performance standards established under ASHRAE Standard 90.1b (current edition). B C Adjustable air intake tube (optional) D A Leg enclosure kit F E (optional) Energy Saver Models Imp. Gal. Cap. U.S. Gal. Cap. Liters Nat.