Spec Sheet
Residential Through-The-Wall
Energy Saver Gas Water Heater
Features:
Bradford White is ISO registered to the
9001 standard.
■ Power vented for positive exhaust during main burner operation—the TTW2
uses a specially designed assembly that blows exhaust gases directly out of the
building, eliminating the need for conventional chimneys or expensive flue
systems.
■ Hot surface ignition system—
Hot surface ignition eliminates the constant
burning pilot used on other water heaters. This device results in savings of pilot
gas during standby periods. (115V AC required to heater) Ignition system
operates off of 24 volts.
■ 3" PVC, ABS & CPVC (76mm) vent—the water heater can be vented
horizontally or vertically with 3" (76 mm) PVC, ABS & CPVC for lengths up to 30
feet (9.1 m) with (3) 90° elbows. (45 equivalent feet) (13.7 m).
■ 4" PVC, ABS & CPVC (102mm) vent—the water heater can be vented
horizontally or vertically with 4" (102mm) PVC, ABS & CPVC for lengths up to 60
feet (18m) with (3) 90° elbows. (75 equivalent feet) (23m).
■ Vitraglas
®
lining—Bradford White water heater tanks are protected from the
corrosive effects of hot water by an exclusive ceramic porcelain-like coating.
The Bradford White high silica Vitraglas
®
lining provides a tough interior surface
for our hot water tanks.
■ Side connections—for space heating.
■ Protective magnesium rod—provides added protection against corrosion for
long trouble-free service.
■ Factory installed Hydrojet
®
Total Performance System—cold inlet sediment
reducing device. Helps prevent sediment build up in tank. Increases first hour
delivery of hot water while minimizing temperature build up at top of tank.
■ Heat Traps—factory installed, minimizes heat loss through piping
■ Water Connections—
3
⁄4" NPT factory installed true dielectric fittings. Extends
water heater life and eases installation (MIITW75T has factory installed dielectric
waterway fittings).
■ 2" Non-CFC foam insulation (65 gallon model has 1" Non-CFC foam)—
covers the sides and top of tank to save energy by retarding loss of heat. Also
increases jacket rigidity.
■ Fully automatic controls—fast acting surface-mount thermostat for automatic
temperature control. Built-in energy cut-off switch prevents abnormally high
water temperature for extra safety. Combination gas valve/electronic module
has built-in gas pressure regulation and electronic circuit controls. Ignition
system operates off of 24 volts.
■ Brass drain valve.
■ T&P relief valve included—all sizes come standard with special tapping on side
of tank.
■ Flue baffle—designed to maximize the amount of heat absorbed in the lower
portion of tank. Reduces air movement in the heater during standby periods to
retard heat loss up the flue.
■ Six or ten year limited warranty on steel tank—heavy gauge steel
automatically formed, rolled and welded to assure a continuous seam for
glass lining.
■ Six year limited warranty on parts.
■ Design certified by CSA International (formerly AGA and CGA).
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385;
6,684,821; 5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165;
5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983;
4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968;
4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS
PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832;
2,045,862; 2,112,515; 2,108,186; 2,107,012.
®
STANDARD
9001
EFFICIENCY
RATING
CERTIFIED