Spec Sheet

ManualsBrandsBradford White ManualsCommercialLarge Volume Stainless Steel Jacketed and Insulated Storage Tank - Canada

Commercial Large Volume Carbon Steel

Jacketed and Insulated Storage Tanks

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419;

7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379;

7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515;

2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas

and Hydrojet HC

are registered trademarks of Bradford White

Corporation.

C481-F-1021 CANADA

5-Year Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.

For more information on warranty, please visit www.bradfordwhite.com

For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete copy

of the warranty included with the heater.

Sample Specification:

The Carbon Steel storage tank shall be a Bradford White Jacketed and Insulated model with a nominal rated storage capacity of not less than_________gallons

(______liters), and overall dimensions of______ inches (_______cm.) in height, by_________inches (________cm.) in diameter. The tank shall be Vitraglas

lined,

and be built in accordance with ASME Boiler and Pressure Vessel Code ASME IV, Part HLW for 125 PSI (862 kPa) and so labeled, with a working pressure of

_________PSI (_________kPa). The storage tank shall have Non-CFC foam insulation and carry a five (5) year limited warranty (ten (10) year limited warranty

available on Double Vitraglas

lining).

General

Front water connections 3" (76mm) NPT (except where noted). T&P tapping 1

⁄4" (32mm) NPT. Aquastat tapping 3⁄4" (19mm) NPT. Most storage tanks are

manufactured with convex heads and bases. Some manufacturers list the tank capacity as “Nominal.” Generally, this is the theoretical capacity calculated assuming

a tank was actually manufactured using a flat (instead of convex) head and base. Bradford White lists both Actual and Nominal capacity for comparison purposes.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

The Large Volume Carbon Steel Jacketed and Insulated Storage Tank

Models Feature:

n All Tanks Are Constructed and Certified— In accordance with ASME

Sect.IV, Part HLW for 125 PSI (862 kPa). 150 PSI (1034 kPa) is available as

an option.

n Vertical or Horizontal Construction—Horizontal models require two

saddles and have two additional 3" (76mm) NPT fittings.

n Steel Jacket—Sturdy heavy gauge painted steel jacket.

n 2" (51mm) (R-value of 12.5) High Density Foam Insulation—Covers the

side and top of tank, reducing the amount of heat loss. This results in less

energy consumption, improved operation efficiencies, and jacket rigidity.

n Vitraglas

Lining—An exclusively engineered enamel formula that provides

superior tank protection from the corrosive effects of hot water. This formula

(Vitraglas

) is fused to the steel surface by firing at a temperature of over

1600°F (871°C).

- Vitraglas

(5-year Limited Warranty) & Double Vitraglas

(10-year

Limited Warranty).

n Optional Hydrojet HC

—Stainless steel, dielectrically isolated recirculation

tube minimizes turbulence and directs the hottest water to the top of the

tank to maximize hot water delivery.

n Magnesium Anode Rods—Provide added protection against corrosion for

long-term, trouble-free service.

n Water Connections—Two female NPT fittings are located on the front

forease of service and installation (reference chart for sizes). Additional size

fittings are available as an option.

n Optional Hand Hole Cleanout and Manway—4"x 6" (102mmx152mm)

diameter Hand Hole cleanout and 12"x16" (305mm x406mm) diameter

Manway opening allow removal of sediment and inspection of interior

surface.

-- Manway standard on all tanks with a vessel diameter of 42" (1067mm)

or greater.

n One 3/4" (19mm) NPT Aquastat Fitting—Located in the lower part of the

tank.

n Designed for Storage of Potable Water up to 180°F (82°C).

Photo is of

NV303JG5A

Summary of content (2 pages)

PAGE 1
Commercial Large Volume Carbon Steel Jacketed and Insulated Storage Tanks Photo is of NV303JG5A The Large Volume Carbon Steel Jacketed and Insulated Storage Tank Models Feature: n All Tanks Are Constructed and Certified— In accordance with ASME Sect.IV, Part HLW for 125 PSI (862 kPa). 150 PSI (1034 kPa) is available as an option. n Vertical or Horizontal Construction—Horizontal models require two saddles and have two additional 3" (76mm) NPT fittings.
PAGE 2
Commercial Large Volume Carbon Steel Storage Tanks Carbon Steel Jacketed Models A A A B B C C (Vert.) (Horiz.) (Vert.) (Horiz.) Required A D D Vertical Horizontal Vertical Horizontal Horizontal Horizontal Diameter Diameter Hot Water Hot Water Shipping Shipping Shipping Shipping Manway Height Height Height Height Length Length Outlet Outlet Weight Weight Weight Weight Conn. Size Conn. Size (in.) (mm.) (mm.) (in.) (mm.) (in.) (mm.) (in.) (mm.) (lbs.) (kg.) (kg.) Nominal Actual Nominal Actual (in.) (lbs.