Spec Sheet
Copper Screw Type Immersion Element
(INCOLOY
®
type immersion element available upon request)
The Upright Electric Models Feature:
n Fully Automatic Thermostat Controls—Fast acting surface-mount
thermostat with high limit energy cut-off (manual reset) for safety.
n Direct Heat Transfer with Immersed Elements—Transfers heat directly
and efficiently to the water. Screw-in style.
n Factory-Installed Hydrojet
®
Total Performance System—Sediment
reducing device that also increases first hour rating of hot water while
minimizing temperature build-up in tank.
n Vitraglas
®
Lining—An exclusively engineered enamel formula that provides
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglas
®
) is fused to the steel surface by firing at a temperature of
over 1600°F (871°C).
n Insulation System—Non-CFC foam covers the sides and top of the tank,
reducing heat loss. This results in less energy consumption, improved
efficiencies, and jacket rigidity.
n Water Connections— 3⁄4" (19mm) NPT factory-installed true dielectric
fittings extend water heater life and simplify water line connections.
n Factory-Installed Heat Traps —Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation.
n Protective Anode Rod—Provides added protection against corrosion for
long-term, trouble-free service.
n Simultaneous and Non-Simultaneous Operation Available—
Simultaneous operation indicates when both elements (if equipped) are being
heated at the same time. Non-Simultaneous operation indicates when one
element is being heated at a time.
n Voltages Available—120V, 208V, 240V, 277V, 480V.
n Single Phase or Three Phase Operation Available—120V & 277V may
only be wired for single phase operation.
n T&P Relief Valve—Installed.
n Design evaluated by UL
®
in accordance with Part 280.707(d) of HUD
Mobile Home Construction and Safety Standards for Energy Efficiency.
Photo is of
RE250T6
Residential Upright
Electric Water Heater
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419;
7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379;
7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515;
2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
C1201-G-0422 CANADA
6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
FEATURING:
44 - 84
THESE MODELS
These models