Installation / Operation Instruction Manual

ManualsBrandsBradford White ManualsCommercialCommander Series ® Atmospheric Vent (UCG) - Ultra Low NOx with ICON HD ® System and BMS Integration (no draft diverter models)

Display Control

To Increase Setpoint Temperature

Step 1: Depress and hold “Temperature Up” button until desired setpoint temperature appears in the display.

Step 2: “Setpoint” indicator begins flashing in the display after pressing “Temperature Up” button.

SELECT

SET

Status

°F

idle

Operational



Step 1

SELECT

SET

Status

°F

idle

setpoint

Operational



Step 2

"Setpoint"

flashes

SELECT

SET

Status

Set button

Select button

Temperature

Down Button

Temperature

Up Button

°F

idle

setpoint

Operational

Sequence of

operation Indicator

Reads "Idle” or “Heating"

Status Indicator

Read "Operational"

or "Service Needed"

Shown flashing

in display only when

temp is adjusted

Temperature Setpoint

in Degrees F or Degrees C

Range: 70° - Max °F

Range: 21° - Max °C

Water Heater Display and Control Buttons