Installation / Operation Instruction Manual

ManualsBrandsBradford White ManualsCommercialCommander Series ® Atmospheric Vent (UCG) - Ultra Low NOx with ICON HD ® System and BMS Integration (no draft diverter models)

32

Step 3: Press “SET” button for new setting to take effect immediately. The setpoint will stop flashing. If the “SET” button

is not pressed, the new temperature setting will take effect in approximately 10 seconds.

To Change Temperature Format in Display from F to C or ˚C to ˚F:

Step 1: Press “SELECT” button until “F/C” is displayed.

Step 2: Press “SET” button to change temperature format. Symbol “F/C” will flash.

SELECT

SET

Status

idle

Operational



Step 2

“°F/°C” Flashes

°F

°F/°C

SELECT

SET

Status

idle

Operational



Press select

Step 1

°F

°F/°C

SELECT

SET

Status

°F

idle

setpoint

Operational

"Setpoint" flashes

for 10 seconds



Press SET for setting to

take effect immediately

Step 3