Cut Sheet

Technical Data Sheet
Clamp On 120v Circuit Breaker Lockout
TDS No. LOTO-14
Effective Date: 10/03/2017
Description
Design
● Extremely versatile device, works on a wide
range of single-pole breakers
● Made of rugged polypropylene and impact
modified nylon
● Use thumbscrew to clamp lockout securely
onto switch tongue, then pull cover over
thumbscrew and lock in place to prevent
clamp from being loosened
● Blade design provides tighter grip with less
torque on thumbscrew
● Accepts lock shackles up to 9/32" in diameter,
and comes with detachable cleats to expand
the range of applicable breakers
Chemical
°C
Chemical
°C
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Fuel, engine: Gasoline (normal &
premium grade)
85
Trichloroethane 1,1,1
45
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
<
120
Fuel, engine: M15 mixture (15%)
methanol)
70
Water (including seawater)
25
Material
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
● Outer Housing: Polypropylene
○ Color: Red (PMS 1805C)
● Steel Clamp: molded Glass-filled Nylon
● Steel Screw: molded Glass-filled Nylon
thumbscrew.
○ Color: Black
UL Rating: UL 94 – HB (Plastic Components
Only)
Temperature Range
Polypropylene Housing: -20° to 80°C (0° to
175°F)
Glass-filled Nylon: -20° to 120°C (0° to 250°F)
Chemical Resistance
All approved chemicals listed are based on the
manufactures specified chemical resistance chart for
plastic material only.