Cut Sheet

ManualsBrandsBrady ManualsLabeling TapeLabel,B30

Technical Data Sheet

BRADY B-7569 VINYL FILM WITH PERMANENT ADHESIVE

TDS No. B-7569

Effective Date: 10/20/2011

Description:

Brady B-7569 is a thermal transfer printable flexible vinyl film coated with a permanent pressure sensitive acrylic adhesive.

B-7569 is designed to be used with the MINIMARK

TM

, Globalmark®, Powermark® and BBP® 31, BBP® 33, BBP® 35, BBP®

37 printers (per regional availability) as well as for pre-printed labeling and floor marking.

Details:

Use:

B-7569 is used for Pipe Markers, Arrow Tape, Warehouse Marking, Floor Marking, Warning Panels, Safety Signs and

Hazardous Substance Identification.

Special Properties:

Permanent acrylic adhesive

Substrate Type:

Vinyl film

Standard Material Colors:

White, red, yellow, green, blue, orange and black

Recommended ribbons

MINIMARK

TM

Standard performance black and white (R-7968), red, green and blue (R-7969)

HIgh performance black (R-6000), white, red, green and blue (R-4400)

Globalmark®, Powermark®:

Standard Ribbons

BBP® 31:

R-10000

Thickness (PSTC-33):

Total: 0.105 mm (0.004 in.)

Adhesive Properties:

Adhesion to Stainless Steel (PSTC-1)

Ultimate Dwell (72 Hrs.) (Avg.) -- 130 N/100mm (120 oz/in)

Adhesion to Powder Coated Metal (PSTC-101)

Ultimate Dwell (72 Hrs.) -- 50 N/100mm (45 oz/in)

Adhesion to Polypropylene (PSTC-101)

Ultimate Dwell (72 Hrs.) (Avg.) -- 60 N/100mm (55 oz/in)

Adhesion to Textured ABS (PSTC-101)

Ultimate Dwell (72 Hrs.) (Avg.) -- 25 N/100mm (25 oz/in)

Tack (ASTM D 2979) (Avg.) -- 700 g (7 N)

Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):

CS-10 wheels, 250 g wts.

After 100 cycles the legend printed with R-7968 has a moderate fading

Print legible up to 300 cycles with R-10000 ribbon

Print legible up to 500 cycles with R-4400 ribbon

Print legible up to 1000 cycles with R-6000 ribbon

Summary of content (4 pages)

PAGE 1
Technical Data Sheet BRADY B-7569 VINYL FILM WITH PERMANENT ADHESIVE TDS No. B-7569 Effective Date: 10/20/2011 Description: Brady B-7569 is a thermal transfer printable flexible vinyl film coated with a permanent pressure sensitive acrylic adhesive. B-7569 is designed to be used with the MINIMARKTM, Globalmark®, Powermark® and BBP® 31, BBP® 33, BBP® 35, BBP® 37 printers (per regional availability) as well as for pre-printed labeling and floor marking.
PAGE 2
Minimum Application Temperature 10°C (50°F) Service Temperature -20°C to 75°C (-4°F to 167°F) Average Outdoor Durability: Up to 3 years (Average expected outdoor life of product will depend on user definition of failure, climatic conditions, mounting techniques, and material color.) Chemical Resistance: Samples were printed with the standard performance ribbons R-7968/R-7969 and the high performance ribbons R-6000/R-4400 using the MINIMARKTM thermal transfer printer.
PAGE 3
Turpentine F F NE F NE F Alconox® NE NE NE NE NE NE DI Water NE NE NE NE NE NE Ethanol Not Tested Not Tested NE NE NE NE Formula 409® Not Tested Not Tested NE NE NE NE Bioact® EC-7RTM Not Tested Not Tested F F F F NorthwoodsTM Buzz Saw Not Tested Not Tested NE F NE NE NE NE NE NE NE NE F F F F F F ASTM #3 Oil NE NE NE NE NE NE SAE 20 Oil NE NE NE NE NE NE Fuels, Oils & Lubricants Diesel Fuel Gasoline NE = No Effect F = Failed (af
PAGE 4
WARRANTY Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligations under this warranty to replacement of the product shown to Brady’s satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers.