Owner's manual

!
INSTALL A T ION!INSTR U C T IO N S !
2000-3811 Instructions 8-1-13.Doc Page 2 of 54
TABLE OF CONTENTS
Pages
Section 1: Scion FR-S
3
Section 2: Scion tC
4 – 6
Section 3: Scion xB
7 – 9
Section 4: Scion xD
10 – 12
Section 5: Toyota 4-Runner
13 – 14
Section 6: Toyota Avalon
15 – 17
Section 7: Toyota Camry
18 – 21
Section 8: Toyota Corolla
22 – 25
Section 9: Toyota FJ Cruiser
2627
Section 10: Toyota Highlander
2829
Section 11: Toyota Matrix
30 31
Section 12: Toyota Prius
32 – 34
Section 13: Toyota RAV4
35 – 37
Section 14: Toyota Sienna
38
Section 15: Toyota Tacoma
3942
Section 16: Toyota Tundra
Toyota Sequoia
43– 46
Section 17: Toyota Venza
47– 48
Section 18: Toyota Yaris
49 – 52
Section 19: Scion iQ
53 54
General Preparation:
1. Park vehicle on level ground and secure with tire chucks.
2. Ensure all radio functions are working properly before disassembly.
3. Record any pre-set radio stations if desired as these may be lost when power is disconnected.
4. Remove any CDs to avoid possible jam.
5. Return all Treble, Bass, Fade, and Balance to neutral setting. The DPS is designed to provide
the best audio experience at the neutral settings. You can, however, adjust them to meet your
desired experience.
6. For vehicles equipped with automatic transmissions, place shifter in the N (neutral) position
and set parking brake.
7. Use a 10mm wrench to loosen the negative battery cable bolt. Remove negative battery cable
from terminal and position away from battery.