Owner's manual

Section 11: Toyota Matrix, 2010 – Current
2000-3811 Instructions 8-1-13.Doc Page 30 of 54
1. Ensure all radio functions are working properly, return
all Treble, Bass, Fade, and Balance to neutral settings,
and remove any CDs to avoid possible jam before
disassembly.
2. For vehicles equipped with automatic transmissions,
place shifter in the N (neutral) position and set parking
brake.
3. Loosen negative battery cable bolt using a 10mm
socket. Remove negative battery cable from terminal
and position away from battery.
4. Begin removing center instrument cluster finish panel
sub-assembly by disengaging the 14 claws and 2
guides. Disconnect each connector.
5. Disengage the central claw retaining the center
instrument cluster finish panel sub-assembly and
remove the panel.
6. Disengage the 3 claws and guide to remove the front
No. 1 console box insert.
7. Disengage the 3 claws and guide to remove the front
No.2 console box insert.
8. Turn shift lever knob counterclockwise and remove
shift lever knob.
9. Remove center instrument cluster finish panel
assembly by disengaging the 9 claws and remove the
panel (NOTE: manual transaxle shown).
Manual transaxle Automatic transaxle