Installation Manual

! INSTALLATION!INSTRUCTIONS!
5000-ca6.doc Page 4 of 5
• 6) Use, Care and Maintenance: 
A. When the vehicle is turned ON you will
hear a series of beeps to notify that the
device is up and running 
B. Simply drive up to the curb at a slow speed
(the device is intended for curbs that are
vertical to the parking space, curbs that are
at an angle will not be detected properly),
and once the curb is within programmed
distance the device will beep to notify you
to stop. 
C. The device will shut down automatically
when the ignition key is turned OFF. 
D. It is recommended that every time the oil is
changed on the vehicle the sensor should be
inspected for proper angle of adjustment
and to insure that the sensor screw has not
come loose. 
E. At every car wash the camera lens and
sensor should be wiped down and any
debris that are obstructing the lens be
removed (the sensor is relies on line of
sight and so any build up will affect its
performance). 
Front sensor and camera mounted.