Owner's Manual

INSTALLATION INSTRUCTIONS

Commercial Grade Rear Camera Kit

(Kit # AHDS-7701)

Please read thoroughly before starting the installation and check that kit contents are complete.

Items Included in the Kit:

Tools & Supplies Needed:

Allen Wrench

66’ Camera Harness

IR Camera w/ Mic and Mounting foot

These instructions

Electrical tape

Zip ties

Plastic panel removal tools

Digital Volt Meter / BCM safe test light

Drill

Sockets

Safety Precautions:

● Work in a well-ventilated area that is clear of obstructions.

● Secure vehicle with tire chucks in both front and rear of tires.

● Turn vehicle accessories OFF and ensure ignition key is in OFF position.

● Wear safety goggles and snug fitting clothes.

● Use tools only for their intended purpose and which are in good repair.

● Only perform this task if confidence, skill, and physical ability permit.

AHDS-7701 Instructions 08-5-2017.docx Page 1 of 2 KB

PAGE 1
INSTALLATION INSTRUCTIONS Commercial Grade Rear Camera Kit (Kit # AHDS-7701) Please read thoroughly before starting the installation and check that kit contents are complete. Items Included in the Kit: Allen Wrench 66’ Camera Harness IR Camera w/ Mic and Mounting foot These instructions Tools & Supplies Needed: Electrical tape Zip ties Plastic panel removal tools Digital Volt Meter / BCM safe test light Drill Sockets Safety Precautions: ● Work in a well-ventilated area that is clear of obstructions.
PAGE 2
INSTALLATION INSTRUCTIONS NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color instructions, as well as an installation video, please visit www.brandmotion.com INSTALLATION: Camera 1. Remove the 4 Allen screws that are located on the sides of the camera. Then remove the camera mounting bracket and visor. 2. Find an appropriate place to mount the backup camera. Line up the foot bracket to ensure that there is enough space to attach the camera to the body.