User Manual

INSTALLATION(INSTRUCTIONS
1240 Instructions 6-26-14.docx Page 2 of 4
Step 1: Remove shift knob by unscrewing the
handle in counter clockwise direction.
Step 2: Use a Plastic Trim Removal Tool to
remove left and right trim on each side of
center stack.
Step 3: Use a Plastic Trim Removal Tool to
remove cup holder / shifter bezel.
Step 4: Use a Phillips Screwdriver to remove
(4) Phillips screws.
Step 5: Remove console cross brace support
by pushing ends towards front of vehicle.
Step 6: Un-Snap and flex console side trim
away from console bin.