Owner's Manual
Table Of Contents
1270 Instructions 9-15-14.doc Page 2 of 5
Step 1: Using a Trim Removal Tool remove
upper armrest cover.
Step 2: Using a Phillips Screw Driver remove
(4) screws to remove upper armrest tray.
Step 3: Cut out provided template, mark the
locations for (4) 3/16” and (1) 5/16” hole.
Step 4: Drill the (4) 3/16” holes.
Step 5: Drill the (1) 1/2” holes.
Step 6: Route connector of Charging Module
through ½” hole and place module in tray.