Owner's Manual


FDMC-1281 Optima .doc Page 1 of 3
2011 – Current Kia Optima Qi Wireless Charging Kit
(Kit # FDMC-1281)
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit: Tools & Supplies Needed:
Qi Wireless Charging Module with
Optima Specific Substrate
Power Harness with 3 amp Fuse
Optima Specific Non Slip Mat
Product guidelines sticker
These Instructions with Template
Plastic Trim Removal Tool
Center Punch/Scribe Tool
Power Drill
1/2” Drill Bit or Uni bit
Wire Ties
Soldering Iron & Solder
(Recommended)
Tape or Heat Shrink Electrical Tubing
*Note this product is designed to work with Qi compatible devices. Please confirm that
your device is Qi compatible before installation. Visit www.brandmotion.com for phone
compatibility guide.
Safety Precautions:
• Work in well ventilated area that is clear of obstructions.
• Secure vehicle with tire chucks in both front and rear of tires.
• Turn vehicle accessories OFF and ensure ignition key is in OFF position.
• Wear safety goggles and snug fitting clothes.
• Use tools only for their intended purpose and which are in good repair.
• Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions.
IMPORTANT: Do not place smart keys
within 15cm of charging mat. Vehicle
may not detect key to start vehicle. Do
not place metal objects in tray while
charging.