Owner's Manual

-
~
MOTION)
INSTALLATION
INSTRUCTIONS
sE~Smless
vehicle
personelizat
1
on
_./
Add-A-Circuit Addendum
Please
read thoroughly before starting
installation
and check
that
kit
contents are complete.
Items
added
to
this kit:
Add-a-circuit power tap
w/
2amp fuse
Safety
Precautions:
•
Work in
well ventilated area that is clear
of
obstructions.
•
Secure vehicle with tire chucks in both
front
and rear
of
tires.
•
Tum
vehicle accessories
OFF
and ensure ignition key
is
in
OFF
position.
•
Wear safety
goggles
and snug fitting clothes.
•
Use
tools only
for their intended purpose and which are in good repair.
• Only
perform this task
if
confidence,
skill,
and
physical ability
permit.
1.
The fuse holder/Add-a-circuit
is
an
ATM
style
fuse.
Check the fuse box
of
the
vehicle
to
see
if
it
has the same style
fuses.
2.
If
you have different
style
fuses,
follow
the instructions provided in this kit for power
connections in the
vehicle.
3.
If
you have the same style
fuses,
use
a computer safe test
light
or
Digital voltmeter
to find a
fuse that
is
accessory power.
(The fuse
will
change from ground when the key is off,
to
12
volts
when the key is turned on).
4.
Remove the fuse and
place
into the open spot on the Add-a-circuit.
5.
Insert the Add-a-circuit in to the fuse box where the fuse was
just
removed from.
6.
Connect
the
black
wire
of
the Freedom
Charge module
to
a
clean solid
ground.
Add-a-circuit
2-25-16
Page
1
of
1