Owner's Manual

ManualsBrandsBrandmotion ManualsCar Audio & VideoSUTV-8857

Camera functionality test (Highly recommended, not required)

Part 2

1. 8837:

2. 8847:

3. 8857:

a. There will be three wires accompanying the

RCA: Red, Green, and Black

b. Using an wire extension (not supplied)

c. Test Camera

a. There will be two wires at the rear of the

harness near the camera

b. Using an wire extension (not supplied)

c. Test Camera

a. There will be two wires accompanying the RCA:

Red and Black

b. Using an wire extension (not supplied)

c. Test Camera

1. Connect twisted red and green directly to positive terminal

of battery

2. Connect Black to negative terminal of battery

1. Connect RCA to Aftermarket radio and

2. Turn Key to on position

3. Place the vehicle in reverse and verify a good image.

1. Twist red and green together = Power

2. Black = Ground

1. Red= Power

2. Black = Ground

1. Red= Power

2. Black = Ground

1. Connect Red wire directly to positive terminal of battery

2. Connect Black to negative terminal of battery

1. Connect RCA to Aftermarket radio

2. Turn Key to on position

3. Place the vehicle in reverse and verify a good image.

1. Connect red wire directly to positive terminal of battery

2. Connect Black to negative terminal of battery

1. Connect RCA to Aftermarket radio and

2. Turn Key to on position

3. Place the vehicle in reverse and verify a good image.

Ground (Black)

12V Power(Red+Green)

Ground (Black)

12V Power (Red)

Ground (Black)

12V Power (Red)

Vehicle Application:

Jeep Wrangler JK

Part Number: SUTV-8857

Installation Instructions - SUTV-8857 Page 5/9AR_03_23_21