Owner's Manual

SummitView™ Jeep Wrangler (JK)

Third Brake Light Add-on

SUTV-8849

Install Time

Recommended Tools

30m

Socket SetScrew Driver Panel Removal Tool Zip Ties

Questions? Call the Brandmotion technical support line at (734) 619-1250 or CLICK HERE

Installation Instructions - SUTV-8894 Page 1/4AR_03_23_21

PAGE 1
SummitView™ Jeep Wrangler (JK) Third Brake Light Add-on SUTV-8849 Recommended Tools Screw Driver Panel Removal Tool Zip Ties Socket Set Install Time 30m Questions? Call the Brandmotion technical support line at (734) 619-1250 or CLICK HERE AR_03_23_21 Installation Instructions - SUTV-8894 Page 1/4
PAGE 2
Vehicle Application: Jeep Wrangler JK Part Number: SUTV-8894 Kit Contents Kit A Components for installing the SUTV-8894 Kit Contents: 1x LED Third Brake Light and OE Connector AR_03_23_21 Installation Instructions - SUTV-8894 Page 2/4
PAGE 3
Vehicle Application: Jeep Wrangler JK Part Number: SUTV-8894 Access the Radio Part 1 Install the 3rd Brake Light 1. Remove the spare tire 2. Locate and remove one #1 Philips holding the camera onto the bracket 3. Line the mounting hole from the new brake light bracket up with the mounting hole of the Camera and mounting bracket and reinstall the one #1 Philip screws. 1 2 3 4 5 6 4.
PAGE 4
Vehicle Application: Jeep Wrangler JK Part Number: SUTV-8894 FAQ Section Installation of the Rear Vision Camera WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.