Owner's Manual

Access the Radio
Install the 3rd Brake Light
Part 1
1.
2.
3.
4.
5.
6.
7.
8.
Remove the spare tire
Locate and remove one #1 Philips holding the
camera onto the bracket
Line the mounting hole from the new brake
light bracket up with the mounting hole of the
Camera and mounting bracket and reinstall the
one #1 Philip screws.
Route cable along Camera harness and follow
the same route as factory 3rd brake light harness
to factory opening in rear door.
Remove cover on inside of rear door and unplug
factory 3rd brake light harness and install new
brake light harness.
Unplug factory brake harness and plugin our
replacement harness
Test 3rd Brake Light
Follow disassembly steps in reverse order for
reassembly.
1 2
3 4
5 6
Installation Instructions - SUTV-8894 Page 3/4AR_03_23_21
7
Vehicle Application:
Jeep Wrangler JK
Part Number: SUTV-8894