BRM500 BRM500-000000 Operation and Service Manual WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. • WARNING: Wear appropriate protective gear, this list includes, but is not limited to: Safety glasses, A hard hat, Protective boots with slip resistant soles, Gloves, Hearing protection • DANGER: Keep riders off and away from machine. Riders can be seriously injured or killed by entanglement or by falling.
BRAVE 800-350-8739 www.braveproducts.com Brave Product Registra�on Form YOUR INFORMATION Full Name: Address: Last First M.I. Street Address Apartment/Unit # City State ZIP Code Alternate Phone: Home Phone: Email PURCHASED FROM Company: Address: Street Address Apartment/Unit # City State ZIP Code MODEL INFORMATION Purchase Date Applica�on Type Model (i.e. BRPT704H) □ Homeowner □ Commercial □ Rental Serial # (i.e. BRPT704HA123456) Signature Register your product online at www.
BRAVE 800-350-8739 Table of Contents www.braveproducts.
BRAVE PERFORMANCE Discharge Volume Pump Head Pressure GENERAL Minimum Inlet Water Pressure Weight Nozzle, Misting Hose Assembly Trigger Gun & Wand Mist Gun – 36” 800-350-8739 Specifications www.braveproducts.com Up to 30 gal/hr / 114 L/hr Up to 500 psi / 34.5 bar over 65 psi may require water inlet regulator 10 psi / 0.68 bar 150 Lbs / 68Kg p/n V12.
BRAVE 800-350-8739 Especificaciones www.braveproducts.com FUNCIONAMIENTO Volumen de Descarga 0.23 gal/hr / 0.87 L/hr Presión de la cabeza de la bomba GENERAL Presión mínima de agua de entrada Peso 200 psi / 14 bar más de 65 psi pueden requerir regulador de entrada de agua 10 psi / 0.68 bar 150 Lbs / 68 Kg Boquilla, nebulización Ensamble de la Manguera Pistola & Lanza - Pistola -Lanza– 36” p/n V12.
BRAVE 800-350-8739 www.braveproducts.
BRAVE 800-350-8739 www.braveproducts.com Mantenimiento de horarios ANUAL CADA 500 HRS CADA 100 HRS CADA 50 HRS ● PRECAUCIÓN: El aceite usado debe desecharse en un contenedor seguro para el medio ambiente y llevarse a un centro de reciclaje de aceite.
BRAVE 800-350-8739 Operation - Safety www.braveproducts.com Machine Unpacking, General Safety Machine Unpacking All cleaners are carefully inspected and cartoned to protect against shipping damage. If there is damage or missing parts, the transportation company agent should make a notation to that effect on the bill. Refer to the parts list in this manual and advise what parts are missing or damaged. If available, give the invoice number on all order bills.
BRAVE 800-350-8739 www.braveproducts.com GENERAL SAFETY 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Before operating this machine, read and observe all safety, unpacking, and operating instructions. Failure to comply with these instructions could create a hazardous situation. The operator of this equipment should not operate this equipment when fatigued or under influence of alcohol or drugs.
BRAVE 800-350-8739 www.braveproducts.com MECHANICAL SAFETY 1. 2. 3. All guards, shields, and covers must be replaced after adjustments are made to prevent accidental contact with hazardous parts. Inspect machine for damaged or worn components and repair or replace to avoid potential hazards. Do not operate the machine if any mechanical failure is noted or suspected.
BRAVE 800-350-8739 www.braveproducts.com WARNING: Use of pressure washer can create puddles and slippery surfaces. ADVERTENCIA: El uso de la hidrolavadora puede crear charcos y superficies resbaladizas. AVERTISSEMENT: L’utilisation de nettoyeur sous pression peut créer les mares et les surfaces glissantes. WARNING: Kickback from spray gun can cause you to fall. ADVERTENCIA: El uso de la hidrolavadora puede crear charcos y superficies resbaladizas.
BRAVE 800-350-8739 www.braveproducts.com Electric Driven Intallation INSTALLATION Location This machine should be installed by only qualified technicians. The machine should be set upon a level surface where it will not be affected by strong winds, rain, snow, extreme heat, and freezing temperatures. Install the machine considering locations for chemical pick-up, fuel connections, electrical connections, water hook-up, venting, and maintenance.
BRAVE 800-350-8739 Copper Wire Size Minimum AWG Machine AMP Draw* 3 Conductor Wires Machine AMP Draw* 2 Conductor Wires 16 10 13 15 -- -- 14 15 18 12 20 25 10 25 30 8 35 40 6 45 55 4 60 70 www.braveproducts.com 2 80 95 Based on Ambient Temperature of 86˚F (30˚C) Based on no more than 100 feet * Use AMP Draw indicated the same or higher than your machine output.
BRAVE 800-350-8739 www.braveproducts.com Chemicals Mix chemicals per the chemical manufacturer’s printed directions. Follow all mixing, handling, application, and disposal instructions. Wear gloves, boots, goggles, and protective clothing appropriate for the chemical being used. WARNING: Chemical Burn Hazard. Chemicals could cause burns resulting in death or serious injury, and/or property damage. ADVERTENCIA: Riesgo de Quemadura Químico.
BRAVE 800-350-8739 www.braveproducts.com ♦ CHEMICAL BALL VALVE: Check the position of the 3 way ball valve on the outlet of the tank. Turn 3 way valve handle to the “up chemical tank position “opening the chemical tank. ♦ CHEMICAL: Mix chemical solution per chemical manufacturer instructions. Mix chemicals per label instructions. Use necessary safety precautions. ♦ SPRAY TIP: Use the supplied nozzle to perform the job. START-UP 1. Remove the nozzle. 2.
BRAVE 800-350-8739 www.braveproducts.com Shut Down - machine need flushed after each use 1. 2. 3. Flip the toggle switch to the ‘off’ position. Remove the nozzle. Turn 3 way valve handle to the “down fresh water” position closing off the chemical tank. 4. Attach a garden hose to the 3-way valve. 5. Turn on the water. 6. Clear water should be flowing from the wand. 7. Turn off water leaving it in “down fresh water” position. 8. Replace the nozzle. 9.
BRAVE 800-350-8739 Machine Troubleshooting Trouble Poor cleaning action Possible Cause Hard water. www.braveproducts.com Remedy Low pressure. Connect machine to water softener. See “low operating pressure.” Little or no chemical being drawn. Improper chemical. See “machine will not draw chemical.” Obtain proper chemical. Improper chemical mixture. Mix chemicals per the label. Follow all mixing, handling, application, and disposal instructions. Low discharge pressure.
BRAVE 800-350-8739 www.braveproducts.com Machine Troubleshooting Continued Pump motor will not start (motor hums) Pump frozen. Machine must be thoroughly warmed to above freezing. Defective motor. Call service technician or take motor to Repair/Warranty station. See PUMP SERVICE. Defective water pump. Excessive back pressure. Pump motor starts Low voltage slow or overheats and stops Excessive back pressure. Defective motor.
BRAVE 800-350-8739 www.braveproducts.com Desembalar la máquina, Seguridad General Desembalar la máquina Todas las lavadoras se revisan y embalan cuidadosamente en cajas de cartón para evitar que se produzcan daños durante el transporte. Si existen daños o faltan piezas, el representante de la empresa de transporte debe hacer una anotación al respecto en la nota de embarque. Consulte la lista de piezas de este manual y notifique si alguna de las piezas falta o está dañada.
BRAVE 800-350-8739 Seguridad general www.braveproducts.com Seguridad general 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Antes de operar esta máquina, lea y siga todas las instrucciones de seguridad, desembalaje y funcionamiento. No cumplir estas instrucciones puede causar una situación peligrosa. El operador de este equipo no debe usarlo cuando se encuentre fatigado ni tampoco bajo la influencia del alcohol o las drogas.
BRAVE 800-350-8739 www.braveproducts.com Seguridad mecánica 1. 2. 3. Todas las guardas, tapas y cubiertas se deben volver a colocar después de realizar ajustes para evitar el contacto accidental con partes peligrosas. Revise la máquina para descartar que existan componentes dañados o desgastados y proceda a realizar las reparaciones o sustituciones necesarias para evitar peligros potenciales. No opere la máquina si existe, o si sospecha que existe, cualquier falla mecánica.
BRAVE 800-350-8739 www.braveproducts.com WARNING: Risk of eye injury. Spray can splash back or propel objects. ADVERTENCIA: El agua rociada puede salpicar o propulsar objetos. AVERTISSEMENT: Risque de blessure d’oeil. Le spray peut faire des éclaboussures en arrière ou propulser des objets. WARNING: Protect machine from freezing. ADVERTENCIA: Proteja la máquina contra la congelación. AVERTISSEMENT: Protéger la machine contre le gel..
BRAVE 800-350-8739 www.braveproducts.com Instalación de la máquina accionada eléctricamente Instalacion Ubicación Esta máquina debe ser instalada solo por técnicos calificados. La máquina debe colocarse sobre una superficie nivelada donde no se vea afectada por fuertes vientos, lluvia, nieve, calor extremo y temperaturas de congelación.
BRAVE 800-350-8739 Tamaño del cable de cobre AWG mínimo Máquina AMP Draw * 3 cables conductores Máquina AMP Draw * 2 cables conductores 16 10 13 15 -- -- 14 15 18 12 20 25 10 25 30 8 35 40 6 45 55 4 60 70 2 80 95 www.braveproducts.com Basado en la temperatura ambiente de 86˚F (30˚C) Basado en no más de 100 pies * Use AMP Draw indicado igual o superior a la salida de su máquina.
BRAVE 800-350-8739 www.braveproducts.com Productos quimicos Mezcle productos químicos según las instrucciones impresas del fabricante de productos químicos. Siga todas las instrucciones de mezcla, manipulación, aplicación y eliminación. Use guantes, botas, gafas y ropa protectora adecuada para el producto químico que se utiliza. WARNING: Chemical Burn Hazard. Chemicals could cause burns resulting in death or serious injury, and/or property damage. ADVERTENCIA: Riesgo de Quemadura Químico.
BRAVE 800-350-8739 www.braveproducts.com • MANTENIMIENTO Consulte el PROGRAMA DE MANTENIMIENTO DE LA MÁQUINA para cualquier mantenimiento que se realice antes de la operación de esta máquina. • SUMINISTRO DE AGUA: El suministro de agua debe ser de al menos 2 galones / 7.5 litros a 5 galones / 18.9 litros y una presión mínima de entrada de agua de 10 PSI / 0.68 BAR. • DEPÓSITO QUÍMICO: Mida la cantidad de químico y mezcle con agua para llenar el tanque de 5 galones / 18.9 litros.
BRAVE 800-350-8739 www.braveproducts.com • QUÍMICO: Mezcle la solución química según las instrucciones del fabricante del químico. Mezcle productos químicos según las instrucciones de la etiqueta. Use las precauciones de seguridad necesarias. • CONSEJO DE PULVERIZACIÓN: Use la boquilla suministrada para realizar el trabajo PUESTA EN MARCHA 1. Retire la boquilla. 2. Gire la manija de la válvula de 3 vías a la “posición superior del tanque químico” abriendo el tanque químico. 3.
BRAVE 800-350-8739 www.braveproducts.com Apagado: la máquina necesita enjuagarse después de cada uso 1. Mueva el interruptor de palanca a la posición “apagado”. 2. Retire la boquilla. 3. Gire la manija de la válvula de 3 vías a la posición de “agua dulce hacia abajo” cerrando el tanque químico. 4. Conecte una manguera de jardín a la válvula de 3 vías. 5. Abra el agua. 6. Debe salir agua clara de la varita. 7. Cierre el agua dejándola en la posición de “agua dulce abajo”. 8. Remplace la boquilla. 9.
BRAVE 800-350-8739 www.braveproducts.com Comprobación de las mangueras ADVERTENCIA: No use un dedo o piel para verificar si hay fugas. El escape de fluido bajo presión tiene suficiente fuerza para penetrar en la piel, causando lesiones graves. No opere la lavadora a presión si la manguera está rajada, desgastada o tiene fugas. A.) Revise todas las mangueras por fugas B.) Verifique todas las mangueras de las áreas desgastadas ALMACENAMIENTO 1.
BRAVE Trouble Poor cleaning action 800-350-8739 www.braveproducts.com localización de averías de la máquina Possible Cause Hard water. Remedy Low pressure. Connect machine to water softener. See “low operating pressure.” Little or no chemical being drawn. Improper chemical. See “machine will not draw chemical.” Obtain proper chemical. Improper chemical mixture. Mix chemicals per the label. Follow all mixing, handling, application, and disposal instructions. Low discharge pressure.
BRAVE 800-350-8739 www.braveproducts.com máquina continua de solución de problemas Pump motor will not start (motor hums) Pump frozen. Machine must be thoroughly warmed to above freezing. Defective motor. Call service technician or take motor to Repair/Warranty station. See PUMP SERVICE. Defective water pump. Excessive back pressure. Pump motor starts Low voltage slow or overheats and stops Excessive back pressure. Defective motor.
BRAVE 800-350-8739 Assembly, Final www.braveproducts.
BRAVE 800-350-8739 Assembly, Gun BRM500 BRM500-000000 05/2020 30 Trigger Gun and Wand www.braveproducts.
BRAVE 800-350-8739 www.braveproducts.com Gun, Trigger SPECIFICATIONS Maximum Volume Maximum Pressure Temperature Port Sizes Inlet Outlet Weight Especificaciones Maximum Volume Maximum Pressure Temperature Port Sizes Inlet Outlet Weight 10.0 gal/m / 37.9 L/m 5000 psi / 344.7 bar 320˚F / 150˚C 3/8” NPT Female 1/4” NPT Female 1.6 lb. / 0.8 Kg 10.0 gal/m / 37.9 L/m 5000 psi / 344.7 bar 320˚F / 150˚C 3/8” NPT Female 1/4” NPT Female 1.6 lb. / 0.
BRAVE 800-350-8739 Assembly, Final BRM500 BRM500-000000 04/28/2020 32 Trigger Gun and Wand www.braveproducts.
BRAVE 800-350-8739 Assembly, Tank www.braveproducts.
BRAVE 800-350-8739 www.braveproducts.com Filter, Water - C04-00186 SPECIFICATIONS Temperature Port Sizes Inlet/Outlet Stainless Steel Screen Dimensions (A) Dimensions (B) Dimensions (C) Weight 150˚F / 70˚C 1/2 NPT 304 SS 50 Mesh 5.08” 3.60” 2.90” 1.5 lb.
BRAVE 800-350-8739 General Assembly BRM500 www.braveproducts.
BRAVE 36 800-350-8739 Electrical Schematic General Assembly www.braveproducts.
BRAVE 800-350-8739 Assembly, Pump www.braveproducts.
BRAVE 800-350-8739 Water Pump www.braveproducts.com Specifications - N06-00201 PERFORMANCE Discharge Volume Pump Head Pressure 2.0 GPM / 7.5 LPM 2000 PSI / 138 BAR GENERAL Crankshaft Rotation Maximum Pumped Fluid Temp. Inlet Pressure Weight (Wet) Shaft Clockwise & Counterclockwise 140˚F / 60˚C -9 in HG@ 75˚F to 116 PSI -0.3 BAR @ 24˚ to 8 BAR 10.7 lbs / 4.9 kg 5/8” LUBRICATION Oil Change Interval Oil Type Crankcase Capacity After 1st 50 hrs and 500 hrs SAE 30 (non-detergent) 8.5 fl oz / 0.
BRAVE 800-350-8739 www.braveproducts.com Freezing conditions - Pump Oil Change Oil Change We recommend the first oil change after the first 50 hours, with the pump stopped and the oil still warm. This change is not recommended because the oil has lost its properties, but rather to eliminate the impurities that have gotten into the oil during the running-in phase.
BRAVE 800-350-8739 www.braveproducts.
BRAVE 800-350-8739 www.braveproducts.
BRAVE 800-350-8739 E PAG 42 Pump Maintenance Records T EF L Y L AL N IO T N E T IN www.braveproducts.
BRAVE E G A P 800-350-8739 I T F E L LY AL N IO T N E NT www.braveproducts.
BRAVE 800-350-8739 E PAG 44 Pump Maintenance Records T EF L Y L AL N IO T N E T IN www.braveproducts.
BRAVE 800-350-8739 www.braveproducts.com BRAVE A Brand of: Great Northern Equipment Distributing, Inc. 20195 S.