Installation Instructions

2
4
2
CERTIFICATION: UL DAMP
3
MOUNT CROSSBAR PLATE
Gently pull the supply wires out of the j-box.
Mount the crossbar to the J-box with the supplied
screws.
MAKE WIRE CONNECTIONS
Gently pull the supply wires through the hole in the
crossbar. Connect the black supply
wire to the black fixture wire. Secure with the supplied
wire nuts. Connect the white supply wire to the white
fixture wire. Secure with the supplied wire nuts. Either
wrap the green wire around one of the protruding screws
or connect it to the supply ground wire. Secure all wire
with electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
MOUNT FIXTURE TO THE CROSSBAR PLATE
Position the fixture plate over the crossbar plate.
Align the holes at the top the plates.
Secure with the supplied screws.