Installation Instructions

1
Installation Instructions for
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Spread all fixture arms equally apart from each other ensuring that they match the slots on the top and bottom covers.
Feed the bottom cap through the inside of the globe bottom, install the bottom cover, and secure in place with the finial.
Feed the cord through the top cap and screw it to the socket assembly, then feed the top cap through the inside of the top
of the globe, install the top cover and secure them in place with the washer and fixture loop.
Follow enclosed supplement installation instructions for electrical and fixture installation onto the junction box.
Install the candle tubes over each socket.
Install the candle tube followers on top of the candle covers.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
1
2
1A
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
4
5
6
7
LAMP
CANDLE TUBE
SOCKET
CANDLE TUBE FOLLOWER
BOTTOM CAP
BOTTOM COVER
FINIAL
TOP CAP
TOP COVER
FIXTURE LOOP
WASHER
SOCKET ASSEMBLY
2
3
3
3
4
5
6
7
FIXTURE ARMS
1
Globe Pendant Medium & Small