PRODUCT NAME: LED Pendant Please consult your electrician for hanging fixture and wiring. WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur. The fixture Is designed to dim with a standard Traci forward phase dimmer. Dimming levels will vary by dimmer.
IMPORTANT: Tum off the power at the main fuse or circuit breaker box before starting Installation S % Setscrews Bracket Mounting Setscrews Locate all hardware & components before discarding packaging 1) Step 1:Remove mounting bracket from fixture and install to electrical box. 2) | Green/Ground / _ Step 2:Adjust wires to desired mounting height.Wire fixtures to wire in outset box. Refer to dual plastic wire Instructions to Cleaning & Care: You may use talcum powder and a soft cloth for cleaning.
Driver Wires Innerspring () Over Mesh () Driver Red %) Denver Please note the low voltage wires consist of an outer mesh wire (ground) and Inner wire (live) that must be separated before re Joining with the driver output wires.