Caution: You must read this before you proceed Table Description QTY A Left Leg 1 B Right Leg 1 C Table Top Frame (with Suction Cups) 1 D Glass Top 1 Label Label Picture Picture Description QTY E Bolt:M6*20MM 9 F Allen Key 1
Before Beginning Assembly: Step 1 Take out the silders in the four ends of Table Top Frame(C ) using Allen Key(F).
Step 2 Open the carton and place all the parts on a clean, non-marring surface. Attach the Table Top Frame(C) to the Left Leg(A) using Bolt(E) and Allen Key(F) as shown in the picture. Loosely tighten the Bolts. Caution: The Table and its Parts are Heavy. Two adults are required for lifting and moving them. Step 3 Attach the Table Top Frame(C) to the Right Leg(A) using Bolt(E) and Allen Key(F) as shown in the picture. Loosely tighten the Bolts. Caution: The Table and its Parts are Heavy.
Step 4 Stand up the table, check stability and then tighten the bolts. Note DO NOT fully tighten a BOLT in one go and then move on to the next. Rather, In a sequential manner, gradually tighten each Bolt until all bolts are evenly secured. This methodology will ensure maximum evenness once all Bolts are fully tightened. Step 5 Place the Glass Top(D) on the assembled Table Frame. Caution: The Table and its Parts are Heavy. Two adults are required for lifting and moving them.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
