Installation Guide

1. Remove three screws from side of switch hub (as shown).
2. Remove bottom portion of hub cover from hub.
3. Attach white wire from light kit to white wire in hub, using wire nuts.
Next, attach black wire from light kit to blue wire in switch hub.
4. Locate both modular wiring plugs. One extends
from the mounting plate on bottom of fan body and one extends from the
Switch Housing. Align the two plugs so the latch on the side of the plugs will
engage when pushed together. Push the two plugs firmly together until latched.
5. Carefully push wires up into hub. Install new hub cover and light kit using
screws removed earlier. Or attach new hub and light kit using screws removed
earlier.
6. Install bulbs.