Instructions / Assembly

1H
2H
4H
8H
1
6
3
4
2
5
2
2
2
3
7
7
6
8
1
2
2
2
4
7
7
5
AAA 1.5V
2
1
3
4
5
6
7
8
Switch
indicator
Speed Controller Fan
Shutdown
Fan Reverse
Natural wind
Lamp Switch
Timer
Battery For Switch AAA ( 1 . 5
V )
(Batteries not included)
9
HOW TO OPERATE CEILING FAN BY REMOTE
CONTROL
Actual use shall be subject to the real product
Learning method of remote control:
Power on the receiver,p
ress
t
he
key at the emitter at once. The le
arning is succeed ,when hear doule beep
ringing from the loudspeaker.
RF wireless digital transmission technology is adopted to realize the one-to-one control providing a rate of
coincident code less than 1 / 50000 . Same code number is attached to the back of the emitter and the receiver.It
is required to return a pair of the same code number of emitter/receiver to the manufacturer for repair service in
case of any damage.
In a sufficient space , you can use the receiver at any angle , no worry about the direction
Notices
：
1. When the emitter is unable to remotely control the receiver , please check whether the switch batteries are in
good contact , whether they are fixed properly and whether they run out of use.
2. When the emitter is unable to remotely control the receiver, please check whether there is other remote control
products around the space and check whether the keys are pressed down , because same nature of remote control
product may cause interference with each other resulting in poor receiving effect. Taking away such articles will normalize
the remote control function. (the infrared remote controller is not included).
4. Please take out the batteries if you will not use this product for a long time.
3. Please use this product under applicable voltage.Too low voltage will lead to failure of the remote controller to work
(Please refer to the product label for the voltage range and related parameters ).
(Batteries not included)