Instructions / Assembly

B
M
M
E
10
Assembly — Hanging the Fan (continued)
6
Making the electrical connections
WARNING:
WARNING:
Follow the steps below to connect the fan to your house
supply wires. Secure the wire nuts (CC) supplied with your
fan by wrapping the connections with electrical tape.
□ Receiver to House Supply WiresElectrical Connections:
Connect the black (hot)wire from the ceiling to the black wire marked
"AC in L" from the receiver.
Connect the white(neutral) wire from the ceiling to the white wiremarked
"AC in N" from the Receiver. Secure the wire connections with the plastic
wire nuts provided.
□ If your outlet box (1) has a ground wire (green/yellow
or bare copper), connect it to the fan ground wires;
otherwise, connect the hanger ball (E) ground wire
to the mounting bracket (B).
□ Secure the wire connection with a plastic wire nut
(EE) provided with the electrical hardware.
□ After connecting the wires, spread them apart so that
the green/yellow and white wires are on one side of the
outlet box (1) and the black wires are on the other side.
Carefully tuck the wire connections up into the outlet
box (1).
To avoid possible electrical shock, ensure the
electricity is turned off at the circuit breaker or main fuse box
before wiring.
Check to see that all connections are tight,
including the ground, and that no bare wire is visible at the
wire nuts, except for the ground wire.
□ Insert the receiver (M) into the mouting bracket (B) with
the flat side of the receiver (M) facing the ceiling.
NOTE: Extension lead wire (P) is available when your
fan installed with a longer downrod.
□ Motor to Receiver ElectricalConnections:
Connect the Red wire from the fan to Red wire from the receiver.
Connect theYellow wire from the fan to the Yellow wirefrom the receiver.
Connect the Gray wire from the fan to the Gray wire from the receiver.
Connect the Blue wire from the fan to the Bluewire marked "For Light"
from the receiver.
Connect the White wire from the fan to the White wire marked "For Light"
from the receiver.
Secure wire connections with the plastic wire nuts provided.
Blue
White
Yellow
Gray
Red
8EE(x8)