Operation Manual

1 Meter (incl. part 4) 1
2 M5x10 DIN 7985C Cross head screw 3
3 Adaptor 9V/500mA 1
4 Connector for hand pulse wire 2
5 Meter socket 1
6 M6 DIN 125 Flat washer 2
7 M6x60 DIN 912 Screw 1
8 Sleeve 1
9 Meter socket seat 1
10 M6 DIN 985 Nyloc nut 1
11 Meter socket knob 1
12 Handlebar post 1
13 M8x16 ISO 7380 Screw 6
14 M8 DIN 137A Spring washer 6
15 M8 DIN 127 Semi-circle washer 6
16 Meter cable (upper) 1
17 Handlebar post cover 1
18 Belt 1
19 Crank screw 2
20 17X1,0 DIN 471 C-type clip 3
21 Ø18/25x0,3t DIN 988 Flat washer 5
22 Curve washer 1
23 6203 RS Bearing 3
24 40X1,5 DIN 472 Flexible ring 2
25 Drive pulley axle 1
26 Screw 3
27 Drive pulley 1
28 Crank ( L ) 1
- Crank ( R ) 1
29 Servo motor assembly (incl. cable) 1
30 M6x16 ISO 7380 Screw 2
31 M6 DIN 127 Spring washer 2
32 M6 DIN 125 Flat washer 2
33 Flywheel compl. (incl. 34-36,39-41) 1
34 Pulley with axle 1
35 One-way bearing set 1
36 Ø18/25x1t DIN 988 Flat washer 2
37 M5x10 DIN 7985 Cross head screw 6
38 Bearing house 2
39 6003 RS Bearing 3
40 Washer 2
41 Ø8/16x2t DIN 125 Flat washer 1
42 Handlebar set (incl. part 43-47,54) 1
43 Tightener 1
44 Hand pulse sensor (incl. part 45) 2
45 Hand pulse wire 1
46 End plug 2
47 Foam grip 2
48 Pedal (L+R) 1
- Pedal strap. Pair 1
49* M8x55 DIN 603 Allen head bolt 4
50* M8 DIN 125 Flat washer 4
51* M8 DIN 986 Nut screw 4
52* Handlebar locking knob 1
53* Sleeve 1
54 Wire cover strip 1
55* M5x14 DIN 7985 Cross head screw 2
56 Front foot (incl. 57,59-64*2pcs) 1
57 Feet end cap 2
58 Washer for feet adjusting cushion 2
59 Adjusting cushion 2
60 Transportation wheel 2
61 Sleeve 2
62 Snap locking 2
63 Rear foot (incl. 57-59*2pcs) 1
64 Nut 2
65 Main frame 1
66 Sensor switch + wire (incl. part 90) 1
67 Cable wire (lower) 1
68 Ø4,2x50 DIN 7981 Screw 6
69 M3x20 DIN 7985 Screw 2
70 Ø4,2x50 DIN 7504 Screw 10
71 Seat post 1
72 Seat 1
73 Front cover (L) 1
74 Front cover (R) 1
75 Seat post sleeve (front) (incl. 76) 1
76 Seat post sleeve (rear) 1
77 Seat post locking knob 1
78 Belt tighener frame set 1
79 M8 DIN 985 Nylon nut 1
80 M8 DIN 9021 Flat washer 1
81 Pulley for belt tighener 1
82 Curve washer 1
83 M8 DIN 125 Flat washer 1
84 M8x20 ISO 7380 Screw 1
85 Spring 1
86 M8 DIN 934 Screw nut (4T) 1
87 Side cover (L) 1
88 Side cover (R) 1
89 Ø10/13,5x1t DIN 7603 Flat washer 2
90 Sensorxedbase 1
91 M4x10 DIN 7985 Screw 1
92* Carriage bolt 1
93 Endplug seat slider (incl. 94, 98, 100) 1
94 Screwxingbase 1
95 Seat slider cover (lower) (incl. 96,99) 1
96 Ø3,5x13 DIN 7981 Screw 2
97 Seat locking knob 1
98 M5x0.8x8 DIN Cross head screw 1
99 Seat sliding tube cover (upper) 1
100 Seat horizontal adjusting tube
(incl. part 93,94,98) 1
101 DC wire 1
102 Hardware kit (incl. *) 1
103 Owner’s manual 1
104 Warranty Booklet
105 Label set 1
Parts list