Operation Manual

Adjusting the incline

The incline (0% - 12%) can be adjusted with the INCLINE +/- buttons on the side

handlebars or on the console. The incline can also be adjusted with the INCLINE

quick buttons. The incline is shown in the incline display.

INCLINE +/- buttons

Press the INCLINE +/- buttons to increase or decrease the incline by 1% at a

time.

2. Press and hold the INCLINE +/- buttons to accelerate the process.

INCLINE quick buttons

Press the 4 button set the incline to 4%.

2. Press the 6 button set the incline to 6%.

3. Press the 8 button set the incline to 8%.

4. Press the 10 button set the incline to 10%.

Pausing the program

Press the START/STOP button to pause the program.

2. Press the START/STOP button again to continue the program.

Resetting the equipment

If you reset the equipment, the console returns to the main menu. The equipment can

be reset in two ways.

During a workout: Press and hold the START/STOP button for 3 seconds.

2. At any moment: Remove the safety key from the console.

Engineer mode

To enter the engineer mode, press the MODE button and the SPEED + button.

To return to the user mode, press the START/STOP button and the SPEED +

button. The display shows the software version.

2. Press the ENTER button. The display shows the roller diameter.

3. Press the ENTER button to confirm.

4. Press the +/- buttons to select metric units (S1) or imperial units (En). Press the

ENTER button to confirm. The display shows the total distance for the workout.

5. Press the ENTER button to confirm. The display shows the total time for the

workout.

6. Press the ENTER button to return to the program menu.

24 RN3