Operation Manual

Cleaning and maintenance

WARNING

– Before cleaning and maintenance, remove the mains plug from the

wall socket.

–

Do not use solvents to clean the equipment.

▪ Do not block the ventilation openings. Keep the ventilation openings clear from

dust, dirt and other obstructions.

▪

Clean the equipment with a soft, absorbent cloth after each use.

▪ Clean the visible parts of the equipment with a vacuum cleaner with a small

suction nozzle

▪ Regularly check that all screws and nuts are tight.

Lubrication (fig. H)

The running belt must be checked for lubrication once per 2 months, based on the

average use of 60 minutes per day.

WARNING

– Before lubrication, remove the mains plug from the wall socket.

CAUTION

– Only lubricate the running belt if necessary. If you apply too much

lubricant, the running belt will slip easily due to lack of friction.

1. Stand steadily on the running belt.

Take hold of the front handlebar and push the running belt with your feet so that

it slides back and forth. The running belt must move smoothly and evenly without

making sound.

3. If the running belt does not move smoothly and evenly or if the running belt does

not move at all, touch the underside of the running belt with your fingertips to

check the lubrication:

RN3 25