Operation Manual

CAUTION

– Make sure that the running belt is aligned correctly to prevent

damage to the edges of the running belt.

1. Set the mains power switch to the on position.

2. Set the speed to 5 km/h.

3. Turn both adjustment bolts 1/4 turn clockwise an equal amount of times.

4. Slow down the running belt by holding onto the side handlebars and braking as

you walk.

5. If the running belt slips, turn both adjustment bolts 1/4 turn clockwise and repeat

the test.

6. If the belt keeps slipping after several tests, contact the dealer.

Defects and malfunctions

Despite continuous quality control, defects and malfunctions caused by individual

parts can occur in the equipment. In most cases, it will be sufficient to replace the

defective part.

If the equipment does not function properly, immediately contact the dealer.

2. Provide the model number and the serial number of the equipment to the dealer.

State the nature of the problem, conditions of use and purchase date.

Error codes

If the display shows an error code (marked with “E” + number), restart the equipment

and check whether the display still shows the error code. If the display still shows the

error code, immediately contact the dealer.

RN3 27