Operation Manual

Transport and storage (fig. E)

WARNING

– Before cleaning and maintenance, remove the mains plug from the

wall socket.

–

Carry and move the equipment with at least two persons.

– Make sure that there are no other persons or objects under the

equipment.

– When folding the folding the equipment, make sure that you hear

the equipment lock into position to prevent the equipment from

dropping back down.

CAUTION

– Before folding the equipment, make sure that the incline is 0%. If

the incline is not 0%, folding will damage the mechanism.

1. Move the equipment as shown (fig. E3). Move the equipment and carefully put

the equipment down. Place the equipment on a protective base to prevent

damage to the floor surface. Move the equipment carefully over uneven

surfaces. Do not move the equipment upstairs using the wheels, but carry the

equipment by the handlebars.

Store the equipment in the upright position (fig. E2). Store the equipment in a dry

place with as little temperature variation as possible.

28 RN3