User manual

11
Slim LED Light Operating instructions
D
FUNCTIONAL DESCRIPTION
(only for versions with motion sensor)
This light is equipped with an infrared sensor. It is switched on automatically if the sensor detects
motion in the environment.
If possible, do not direct the motion sensor at swimming pools, heating air exhausts, air conditi-
oning units or objects which are exposed to major temperature uctuations. Avoid directing the
motion sensor at trees or bushes or at places which could be frequently visited by pets. The motion
sensor can be horizontally rotated to the right and to the left.
When mounting the light remember that the motion sensor will react most sensitively to motions
crossing its eld of detection from one side to the other and least sensitively to motions directly
approaching the unit.
ADJUSTING THE MOTION SENSOR
Fig. 4
L
N
N L
L
N
N L
C
C
B
< 3 m
90°
100°
180°
10 ± 5 sec. - 5 ± 1 min. 0 - 2000 LUX
B
A
B
A
B
Rotate the cover of the motion sensor by 180°
downwards; two controllers will appear (see
g. 4).
Time adjustment (clock symbol, left):
Using this controller, you can select any switch-on
time between approx. 10 seconds and 5 minutes
after the last motion was detected. Rotating the
TIME controller clockwise decreases the time
period, rotating it counterclockwise increases it.
Light adjustment (sun and moon symbol, right):
The light adjustment determines from which brightness level the sensor will switch on the light.
The (

) position indicates that the sensor works by day and at night, in (

) position, the sensor
will only work at night. To adjust the sensor, wait until the desired ambient brightness is reached.
Completely rotate the light adjustment controller to the (

) symbol. Slowly rotate the controller
in the direction of the (

) symbol until the light is switched on by the motion.
The light will now be activated from the set brightness when a motion is detected.
Motion sensor: passive infrared sensor
Detection range: up to 12 m/up to 90° (horizontal)
Time adjustment: approx. 10 sec. to 5 min.
Ambient brightness: 0 – 2000 Lux
MAINTENANCE
Attention: The LED light does not contain components that require maintenance.
The LED light source of this light must only be replaced by the manufacturer, a service
technician sent by the manufacturer, or by another person with similar qualication.
Never open the light when the mains plug is still connected to the mains.
Caution: Risk of fatal injury from electrical current!
17P028 Slim LED Strahler 170411.indd 11 11.04.2017 14:31:06