User manual
5
D
Operating Instructions
SMD LED Light
ML DN 2806 S IP54 / ML DN 4006 S IP54 / L DN 2806 S IP54
Please note: Please read these instructions carefully prior to mounting the light and store them
in a safe location afterwards!
TECHNICAL DATA:
Type of protection: IP 54
Protection class: I
Nominal voltage: 220 – 240 V~ 50/60 Hz
Operating temperature: -20°C – +40°C
Article: Output: Connection cable: Dimensions (mm) Weight:
ML DN 2806 S IP54 20 W 2 m H05RN-F 3G1.0 194 x 210 x 326.5 1800 g
ML DN 4006 S IP54 30 W 2 m H05RN-F 3G1.0 194 x 210 x 326.5 1800 g
L DN 2806 S IP54 20 W 3 m H05RN-F 3G1.0 194 x 80 x 194 1150 g
PROPER INTENDED USE:
This high-performance LED lamp is for lighting interior and exterior areas (e.g. workshops,
camping, garage, household, etc.). The LED lamp is delivered, ready to connect, with a connection
line and ground contact plug. All models are spray water-resistant.
Any other use than those described above or modications to the device are not permitted.
OPERATION:
ML DN 2806 S IP54 / ML DN 4006 S IP54
Place on a dry, at surface. The lamp can be switched on and o using the switch on the rear side.
L DN 2806 S IP54
The lamp can be installed on a suitable tripod. Make sure the tripod is suciently stable and the
lamp is securely installed.
Installation height: <3 m.
BA_SMD_LED-Leuchte_ 0487226_240707.indd 5 24.07.15 13:46