User manual
6
D
Operating Instructions SMD LED Light
SAFETY NOTES:
1. Prior to commissioning, make sure the right voltage is available.
2. Prior to each use, make sure the light and mains supply cable are not damaged in any way.
Never use the lamp if you nd damage.
Caution! A damaged light or mains supply cable pose a risk to life due to electric shock!
3. Do not use this light without properly attached gaskets!
4. Do not use the work lamp in explosive environments in which ammable liquids, gases or
dusts are present. Risk to life!
5. LED lights are extremely bright. Do not look directly at the lamp.
6. Damaged protective covers must be replaced with an original Brennenstuhl® protective cover
before the light can be used again.
7. If the mains supply cable of the device is damaged it must be replaced by a qualied technician
in order to avoid risks.
8. Make sure the light is attached rmly and securely. Make sure the cable is not crimped or
otherwise damaged.
9. Keep children away from the lamp. Children cannot estimate the risk of electric shock.
Screws
Spring washers
Flat washers
Fastening screw
Spring washer
Flat washer
BA_SMD_LED-Leuchte_ 0487226_240707.indd 6 24.07.15 13:46