Operation Manual

2. Using DIP switches (10) 1 through 5, set a system code.

3. Close the battery compartment (9).

Setting the system code on the switch outlet

1. Unscrew the screw (15) on the cover (12) using the right

sized Phillips head screwdriver.

2. Sightly lift the cover (12) over the screw opening (11) and

swivel it outward.

3. Using DIP switches (13) 1 through 5, set the same system

code used for the remote control.

Assigning the switch outlet to an operating button

1. Using DIP switches (13) A through E, set an operating

button on the remote control.

DIP switch E is not assigned.

11 12 13 14

RCS 1044 N Comfort

079515 BA_Funkschaltset RCS 1044 N.qxp 24.09.15 08:41 Seite 15