How to Guide

• Do not put any stress on the power cord where it connects to the appliance, as the

power cord could fray and break.

• This Blender has a pulse feature with the “Off” button. To shut off completely

please disconnect from power supply.

• A scraper may be used but only when the blender is not running.

• To reduce the risk of injury, never place blade assembly on base of without securing

it properly.

• Do not blend hot liquids.

• Do not use the Jar if it has been damaged.

• Avoid contact with moving parts.

• Keep hands and utensils away from the Blender while in use to reduce the risk of

injury

• Blades are extremely sharp. Handle with care.

SPECIAL INSTRUCTIONS:

Do not use for Ice Crushing only or overfill with frozen fruits. Make sure you have filled

with at least 1 cup of liquid before adding frozen solids.

A short power supply cord is provided to reduce the risk of becoming entangled in or

tripping over a longer cord. An extension cord is not recommended for use with this

product, but if one must be used:

 The marked electrical rating must be at least as great as that of the product.

 If the product is of a 3-prong grounding type, the extension cord must be a

grounding-type 3-wire cord.

 Arrange the extension cord so that it will not drape over the countertop or

tabletop where it can be tripped over or pulled.

WARNING: This product is equipped with a polarized plug (one

blade is wider than the other blade) to reduce the risk of

electrical shock. This is a safety feature. The plug will fit into a

polarized outlet only one wa If you are unable to insert the plug

into the electrical outlet, try reversing the plug. If the plug still

does not fit, contact a qualified electrician. Never use the plug with an extension cord

unless you can fully insert the plug into the extension cord. Do not alter the plug. Do

not attempt to defeat the safety purpose of the polarized plug.

Tamper Resistant Screw:

Warning: This Blender is equipped with a tamper-resistant screw to prevent the

removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt

to remove the outer cover. There are no user serviceable parts inside. Repair should

only be done by authorized service personnel.

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE