How to Guide

4
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as there
may be accessory parts contained within the packaging material.
WARNING: Before your first use, wash the Glass Jar, Filler Cap, Lid, and Blade
Assembly using warm soapy water. Rinse and dry thoroughly.
Blender Jar assembly is as follows:
1. Turn the Blending Jar upside down and place on a flat surface.
2. Add the Blade to the Base and top with the Rubber Gasket.
3. Place the Blade Assembly with the Gasket between the Glass and the Blade.
4. Turn the Base clockwise until it is tightly secured.
5. Turn the assembled jar right side up. You may choose to add water to the jar over a
sink to make sure the base was positioned correctly and does not have leakage.
Parts:
Non-Skid Feet
and Cord Storage
Blade Assembly
-Blade
-Gasket
-Base
Lid & Filler Cap
12 Speeds
(Off/ Pulse Button)
( Hi/Lo Button )
Plastic Jar
50 oz. Capacity