the All Climate™ Dehumidifier Instruction Book - LAD250
Contents 2 6 7 8 8 9 12 13 Breville Recommends Safety First Components Control Panel Features Assembly Functions Care, Cleaning & Storage Troubleshooting BREVILLE RECOMMENDS SAFETY FIRST At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care and adhere to the following precautions.
• To protect against electrical hazards, do not immerse any part of the dehumidifier in water or other liquids. Do not use the dehumidifier in the immediate surroundings of a bath, shower or swimming pool. • Water in the water tank is not suitable for drinking. Do not drink this water, and do not serve to animals or use to water plants. When you empty the water tank, pour the water down a drain.
• The appliance is not intended • Keep the dehumidifier and dust filters clean. Follow the for use by persons (including cleaning instructions provided children) with reduced physical, in this book.
• The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. • See your electrician for professional advice.
Components Front Back A B F C G H D I E A. B. C. D. E. F. G. H. I.
Control Panel A B C HUMIDITY SPEED OVERHEAT EMPTY ME F A. B. C. D. D E TIMER LOW 40% 1H MED 50% 2H HIGH 60% 4H CONTINUOUS 8H ION FILTER ON G Power On/Off Fan Speed Humidity Setting Timer E. Ion Filter On/Off F. Overheat Warning Light G.
Features Assembly WHAT IS A DEHUMIDIFIER? BEFORE FIRST USE Your Breville dehumidifier is designed to reduce and maintain the level of humidity in the air as well as to prevent condensation and mildew on the ceilings and walls. 1. Before using your dehumidifier for the first time, remove all packaging material and promotional labels. 2. Check for any missing or damaged parts as per the components list. 3. Clean all parts according to the Care, Cleaning & Storage section of this book. 4.
HUMIDITY SETTING Functions USING YOUR BREVILLE DEHUMIDIFIER 1. To operate the dehumidifier, press the POWER button. 2. The unit will start with a default fan speed of Medium and the humidity setting set to Continuous. 3. To turn the dehumidifier off, press the POWER button again. 4. The internal fan will continue to operate for 4 minutes after the unit is turned off to cool the dehumidifier down. NOTE The dehumidifier cannot operate if the water tank is full or is not installed correctly.
ION FILTER The inoniser produces charged negative ions that attach to floating particles, such as dust and allergens, removing them from the air. ION FILTER button to turn 1. Press the the ioniser On or Off. TIMER If a time is selected, the dehumidifier will automatically turn off when the time has elapsed. If no time is selected, the dehumidifier must be manually turned off. 1. Press the TIMER button to select 1 hour, 2 hours, 4 hours or 8 hours with the light illuminating next to the time selected. 2.
CONTINUOUS DRAINAGE (hose drainage gravity-assisted) The continuous drainage outlet allows water to drain without having to monitor and empty the water tank. Ensure the hose (included) is properly inserted into the water outlet before starting the dehumidifier. 1. Remove the water tank to access the continuous drainage outlet. 2. Insert one end of the hose (included) into the outlet, ensuring that the hose is slid right to the back of the outlet. 3.
Care, Cleaning & Storage WARNING Before cleaning or maintenance of the dehumidifier, ensure the power is switched off at the outlet, and the plug is removed. CLEANING YOUR DEHUMIDIFIER 1. Keep the unit upright when cleaning 2. Wipe the dehumidifier housing, control panel, and air inlet and outlet grilles with a soft, dry cloth. 3. To remove dirt that has built up heavily, wipe with a slightly damp cloth only. 4.
Troubleshooting TROUBLESHOOTING GUIDE Before carrying out any of the following service checks, unplug the unit from the mains. PROBLEM POSSIBLE CAUSES Not working. • Power plug is disconnected. • Plug the power cord into the WHAT TO DO power socket. • The tank is full of water. • The tank is not in the right • Empty the water tank. • Position the water tank correctly in • The filter is too dirty. • Clean the filter.
Notes 14
Notes 15
Breville Customer Service Centre Australian Customers New Zealand Customers Phone: 1300 139 798 Phone: 0800 273 845 Web: Web: www.breville.com www.breville.com Breville, the Breville logo, Master Every Moment, All Climate and SenSair are trademarks of Breville Pty. Ltd. A.B.N. 98 000 092 928. Copyright Breville Pty. Ltd. 2019. Due to continued product improvement, the products illustrated/photographed in this booklet may vary slightly from the actual product.
