User Manual

9
Functions
USING YOUR BREVILLE
DEHUMIDIFIER
1. To operate the dehumidifier, press the
POWER button.
2. The unit will start with a default fan speed
of Medium and the humidity setting set to
Continuous.
3. To turn the dehumidifier off, press the
POWER button again.
4. The internal fan will continue to operate for
4 minutes after the unit is turned off to cool
the dehumidifier down.
NOTE
The dehumidifier cannot operate if the water
tank is full or is not installed correctly.
NOTE
This dehumidifier produces heat during
operation which may cause room temperatures
to rise by 1°C to 4°C, especially if used in an
enclosed space.
SENSAIR™ LIVE HUMIDITY CONTROL
• Your Breville All Climate™ Dehumidifier
has a built-in sensor to detect changes in
the humidity level in the air. This allows the
unit to keep the relative humidity (%) on the
selected humidity level.
HUMIDITY SETTING
The default humidity setting for this
dehumidifier is CONTINUOUS.
The Humidity Setting allows you to manually
set the relative humidity (%RH) level between
40%, 50%, 60% and CONTINUOUS.
To select the humidity level, press the
HUMIDITY button until the light
illuminates next to the desired level.
When the selected humidity level is reached,
the dehumidifier will switch to fan-only
for 5 minutes to cool down, then stop.
Every 30 minutes thereafter, the unit will
operate on low speed to check the humidity.
If the humidity rises above the set humidity
level, the dehumidifier will restart.
NOTE
When using the Humidity Setting, the
dehumidifier will turn off when the ambient
relative humidity (%RH) is less than 2% of the
level selected.
NOTE
The humidity level will only operate on
Continuous when on High speed.
FAN SPEED
The Fan Speed can be manually selected.
1. Press the
SPEED button to cycle
between Low, Medium (Med) and High.
The light will illuminate next to the selected
speed.