the AirRounder Plus Connect TM Instruction Book - LPH708
SPECIFICATIONS Contents 2 Breville Recommends Safety First 8 Components 8 Remote Control Panel 9 Control Panel 9 Display Screen 10 Features 11 Assembly 12 Functions 17 Wi-Fi Connectivity & Voice Assistants 20 Care, Cleaning & Storage 21 Replacing the Filter 22 Troubleshooting BREVILLE RECOMMENDS SAFETY FIRST Filter Life Approx. 9 months Product Dimensions (HxWxL mm) 591.5 x 253.8 x 253.8 For room size 30 to 40m² Noise level (Max) 60dBA Power Consumption 2100W Weight Approx. 5.
• To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this purifier fan heater. • Avoid touching the purifier fan heater body while it is on as some parts of the purifier fan heater are hot. When moving the purifier fan heater, switch OFF and let the purifier fan heater cool down before attempting to move it. • When moving the purifier fan heater, always carry the purifier fan heater by the base.
• Do not operate the purifier fan heater with a damaged cord or plug, or if the purifier fan heater has been dropped or damaged in any matter, return the purifier fan heater to your nearest Breville service centre for examination, electrical or mechanical adjustment or repair. • Do not operate the purifier fan heater with the power cord damaged, frayed or split, wound around any part of the purifier fan heater, or in contact with heated surfaces of the heater.
• Do not operate the purifier fan heater on a sink or drain board. • To avoid an electrical overload, it is recommended that no other appliances are plugged into the same circuit as your purifier fan heater when it is in use. • Do not move the purifier fan heater when it is switched on. • Do not use outdoors. This purifier fan heater is not intended for commercial use such as construction sites. • Use this purifier fan heater only as described in this instruction manual.
• To protect against electric shock, do not immerse the power cord, power plug or appliance in water or any other liquid or allow moisture to come in contact with the part, unless it is recommended in the cleaning instructions.
• Always turn the appliance to the OFF position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use. • Before cleaning, always turn the appliance to the OFF position, switch off at the power outlet, unplug at the power outlet and remove the power cord, if detachable, from the appliance and allow all parts to cool. • Do not place this appliance on or near a heat source, such as hot plate, oven or heaters.
Components A G B I H C D E A B D 60° 120° 360° LO MED HI 1H-7H LO MED HI F A. B. C. D. E. F. G. H. I. Touch Control Panel Light Ring Front Grille LED Display Front Vent Oscillating Base (up to 360 degrees) Remote Control 3- Layer Filter Removable Back Vent (rear cover) NOT PICTURED • Power Cord and Plug • Remote Control Storage • Non-Slip/Non-Marking Rubber Feet 8 C SET TEMP REMOTE CONTROL PANEL A. B. C. D.
Control Panel TOUCH CONTROL PANEL A. Timer (up to 7 hours) & light ring button B. Oscillation 60°C, 120°C, 360°C & Filter Reset button C. Cooling LOW/MEDIUM/ HIGH, Temp decrease & Child Lock button D. Heating LOW/MEDIUM/ HIGH, Temp increase & Set Temp button E. Power ON/OFF & Wi-Fi button 1H 2H 4H 60° 120°360° LIGHT RING FILTER RESET A B LO MED HI LO MED HI SET TEMP C D E CAUTION: DO NOT COVER A B C D DISPLAY SCREEN A. Ambient/Set Temperature display B. Wi-Fi C.
Features WHAT IS THE AIRROUNDER PLUS™ CONNECT PURIFIER FAN HEATER? SAFETY FEATURES The Breville AirRounder Plus™ Connect purifier fan heater features an air purifier, heater and cooling fan in one. The Purifier improves your indoor air quality using 3 distinct levels of protection. There is a tip-over switch inside the purifier fan heater. If the purifier fan heater is accidentally tipped over, the purifier fan heater will stop operating.
Assembly BEFORE FIRST USE • Remove and safely discard any packaging material or promotional labels attached to your purifier fan heater and filter. Check for any missing or damaged parts as per the components list. • Remove the filter from the purifier fan heater (see REPLACING THE FILTER on page 19) and take it out of the plastic bag. Then reinsert the filter into the purifier fan heater.
Functions OPERATING YOUR PURIFIER FAN HEATER NOTE The purifier automatically operates when either Heating or Cooling is turned on. It is recommended to use the Low Fan setting to purify the surrounding area when a room temperature adjustment is not required. Place the purifier fan heater on a flat surface. Insert the power plug into a 230V or 240V power outlet and switch on at the outlet. When switched on, a chime will sound to confirm the unit is switched on and it is in standby mode.
ROOM AMBIENT TEMPERATURE To help maintain a comfortable environment, your Breville AirRounder Plus™ Connect purifier fan heater is fitted with a temperature sensor that detects the room temperature (in °C) which will display on the LED display screen. The number displayed is only an indication of the room temperature and will vary depending on the location of the purifier fan heater in the room.
NOTE Choose the heat setting to determine how quickly the purifier fan heater will maintain the set temperature setting. NOTE When the purifier fan heater is turned on from standby, the memory function will start heating based on the previously set temperature and heating setting. NOTE When operating the purifier fan heater remotely in heat mode, the purifier fan heater will automatically switch off after 7hrs by default. SET TEMP & SENSAIR 1.
To cancel the pre-set auto-off time, once the timer is set, tap the button repeatedly on the control panel or press on the remote control until the number of hours no longer illuminates on the control panel LED lights. NOTE The timer can be set on all modes and all modes can be adjusted at any time once the timer is set. The purifier fan heater will switch to standby mode once the set time has elapsed. OSCILLATION The purifier fan heater has horizontal oscillation. The oscillation can be set on all modes.
USING THE REMOTE CONTROL The remote control includes 1 x CR2032 3V Lithium battery. This Lithium battery is protected by an isolating slip. Before first using the remote control, remove the battery isolating slip by pulling the slip outwards away from the remote control.
Wi-Fi Connectivity The Breville AirRounder Plus™ Connect purifier fan heater can offer remote operation by using a home Wi-Fi connection and the Breville Home Connect™ app downloaded to a compatible mobile phone. through the Google Play store or Apple App store. To go straight to the appropriate app store, scan the QR code below. CONNECT YOUR PURIFIER FAN HEATER TO WI-FI 1. Ensure the mobile device is connected to a home Wi-Fi network. 2.
Voice Assistants The Breville AirRounder Plus™ Connect purifier fan heater comes with the added feature of voice assistance, allowing you to control your purifier fan heater using your voice by linking your Breville Home Connect™ app with Amazon Alexa and Google Home/Assistant. To link your Breville Home Connect app account with either Amazon Alexa or Google Home/ Assistant, refer to the instructions on www.Breville.
VOICE CONTROL WITH GOOGLE HOME/ASSISTANT: Before you can voice control your Breville AirRounder Plus™ Connect with Google Home/ Assistant, you need to link the Breville Home Connect™ account to the Google Home/Assistant app as per the instructions. Download the Google Home/Assistant app and create an account before starting on the below steps.
Care, Cleaning & Storage The purifier fan heater and filter should be cleaned at least once every month. Ensure the purifier fan heater is switched off and disconnected from the power outlet and allow all parts to cool before cleaning or storing. • Use a clean, dry cloth to clean all external surfaces of the purifier fan heater. NOTE More frequent cleaning may be required depending on environmental conditions.
FILTER CARE & CLEANING 1. Remove the rear housing cover (Fig 7). WARNING The filter is not washable. Do not immerse any part of the air purifier in water as it will cause damage. • The Pre-filter should be cleaned at least once every month using a vacuum cleaner. Gently vacuum using a hand-tool attachment such as a brush or upholstery tool. Clean more often if required (Fig 6). Fig. 7 2. Remove the used filter using the pull tabs on the filter (Fig 8). Fig.
3. Remove all packaging from the replacement filter then place into the purifier fan heater with pull tabs facing the opening (Fig 9). NOTE There is no top or bottom on the filter. The filter can be placed into the unit either way. NOTE If the filter is not in place or not fitted correctly, the purifier fan heater will not operate. REPLACEMENT FILTERS Fig. 9 4. Ensure the filter is correctly fitted. 5. Replace the rear housing cover (Fig 10).
Troubleshooting MINI TROUBLESHOOTING GUIDE Before carrying out any of the following service checks, unplug the unit from the mains. PROBLEM Unit will not start Insufficient air flow Excessive noise Light ring not illuminating Not heating in the heating mode WHAT TO DO • Check that the power plug is connected to a power outlet and the outlet is turned on. • Check that purifier fan heater is assembled correctly. • Check that the filter is fitted correctly in place.
BREVILLE HOME CONNECT™ APP TROUBLESHOOTING PROBLEM Why can’t I connect my purifier fan heater to Wi-Fi network? How do I change my Wi-Fi network to a 2.4GHz Wi-Fi network? WHAT TO DO • Check that your purifier is within range of the Wi-Fi router • During the setup process you must be on a secure 2.4GHz Wi-Fi network. • Make sure the Wi-Fi password you entered is correct. • Check that the filter is fitted correctly in place. • Unplug the purifier for 10 seconds and plug it back in.
TROUBLESHOOTING GUIDE FOR AMAZON ALEXA AND GOOGLE HOME/ASSISTANT PROBLEM Why is Amazon Alexa or Google Home/Assistant not responding to my voice commands. WHAT TO DO • Check the internet connection. • Restart your device & mobile phone. • Restart your modem and router. • Make sure your Amazon Alexa or Google-enabled device or mobile phone is in Wi-Fi range. • When you are giving a command to Amazon Alexa or Google Home/Assistant make sure you are clear and there is no unwanted noise in the background.
Note 26
Note 27
Breville Customer Service Centre Australian Customers New Zealand Customers Phone: 1300 139 798 Phone: 0800 273 845 Web: Web: www.breville.com www.breville.com Breville, the Breville logo, Master Every Moment, AirRounder Plus, ThermoSecure, SensAir System and Breville Home Connect are trademarks of Breville Pty. Ltd. A.B.N. 98 000 092 928. Copyright Breville Pty. Ltd. 2021 All other brands may be trademarks of their respective owners.